0.220" 2-Sided Hard Coated Polycarbonate—Maximizes visibility while minimizing physical and UV damage to the windshield
One-Piece Gasket with Fully Welded Seams and Molded Corners—The vehicle specific designed gasket creates a weather tight seal within the extruded channel of the Pro-Fit cage
Seizmik Compatible—Works with Seizmik mirrors and framed door kits
OEM Compatible—Works with most OEM cab system components
Trailerable—Up to 65mph when properly prepared
Flip Up Features:
Single Point Release System—Opens with a quick, low-effort twist of the handle
Latching Mechanism—Windshield closes easily and latches shut with minimal force
Spherical Ball Rod Ends—Utilized as self-aligning hinges allowing for a smooth range of motion less binding
Center Retainer and Rub Plate—Serves as a upper hinge point and helps minimize oscillation when riding with the windshield in the opened position
Gas-Filled Struts—Smoothly opens and closes the windshield and keeps the windshield in the fully opened position
Ergonomic Handle—For an easy grip with or without gloves
Less Visual Distraction—3/4" round tubing paired with glass filled nylon mounts creates a slimmer profile than similar stamped steel systems
Vent Features:
2 Tinted Polycarbonate Vents—Made of durable and impact resistant polycarbonate
Gasket Sealed Components—For protection against wind and water intrusion
Defog Mode—Incoming air can be directed at the inside window surface to help prevent fogging
Fully Adjustable Air Flow—Easy-to-use louver with detents makes changing the airflow through your vents simple
Tinted Design—Allows visibility through the vents
On Hot Days
On hot days, a quick twist of the ergonomic handle opens the windshield smoothly and holds it in the fully open and up position thanks to the two gas-filled struts. Closing is as easy as pulling the windshield back down—the latching mechanisms on the lower corners engage and keep the window closed. Our low-effort, single point release system utilizes 3/4" round tubing and glass filled nylon mounts, creating a less distracting and more elegant profile along the lower edge of the windshield when compared to similar stamped steel systems.
For Cooler Rides
For cooler rides, keep the windshield closed and utilize the Versa-Vents. The dual vent system is designed to add independent driver and passenger ventilation and anti-fogging features to the windshields. Now featuring a tinted, see through design, the innovative windshield vents gather air off the hood and re-directs the air to the inside of the vehicle—as much or as little as either the driver or passenger desires. The easy to use louver now includes detents for quickly finding the closed, defog, and opened positions.
Spherical Ball Rod Ends
Spherical ball rod ends are utilized as self-aligning hinges along the top of the windshield, allowing for the windshield to pivot freely throughout its range of motion and minimize any binding that may occur. The center retainer and rub plate act as an upper hinge point and helps minimize oscillation when riding with the windshield in the opened position.
Additional Features
The one-piece, full perimeter gasket is specifically designed for the Polaris Full Size Pro-Fit Ranger. Featuring fully welded seams and molded corners, the gasket creates a weather tight seal and is designed to fit within the channels of the Pro-Fit extruded cage. And, foul weather won't cause issues with the vents as well. The design of the scoop and the gasket between it and the windshield keeps precipitation out while still allowing airflow in—as much or as little as either the driver or passenger desires.
Warning: This product can expose you to chemicals including Chromium, which is known in the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
Warning: This product can expose you to chemicals including Chromium, which is known in the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
