High Lifter's service team uses a hydraulic press to install the ball joint with the correct pressure and alignment, also making sure the clip is fully seated and secured. Purchasing control arms with the ball joints already installed prevents damage due to improper installation, which is not covered by High Lifter's Lifetime Warranty.
The ball joints preinstalled in this kit are BJP-4.
Our arms maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection, and visual appeal. Don't be fooled with too much arch that puts your axles into greater risk of damage. Our precision manufacturing process ensures each control arm installs exactly like the factory arm. Depending on the model, most kits will have the High Lifter logo precision cut into the bracing.
Installation is made easy with our step by step and multi-image instructions. During installation, you can use stock bushings and ball joints for easy installation. Even better, High Lifter will install your ball joints before shipping. (See our control arms with preinstalled ball joints.) Always check for bearings, bushings, ball joints, and brake wear before installation and replace if needed. We always recommend checking these parts before you start your installation to save time and get back on the trail sooner. See the Replacement Parts Tab to purchase replacement parts as needed.
Features:
25% larger than average stock arms - Crafted from 1 ¼" DOM steel
Up to 2.5x the wall thickness of an average stock arms - .188" wall thickness
Grease fittings included for most models
Added ground clearance featuring bends that maximize clearance and axle protection
Most stock powder coat colors available in stock
Easy to install and maintain
Limited Lifetime Warranty
Tire Fitment:
Up to 35"
Our tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.
Note: In order to work on the RZR Turbo Models and FOX Edition, you must remove front factory sway bar for these applications. The front sway bar will not work in conjunction with High Lifter Max Clearance Kit when installing on Turbo and FOX Edition RZR Models.
NOTE: The ball joints installed in this kit are BJP-4.
This product comes with standard ball joints preinstalled.
2016 Polaris RZR XP 1000 EPS 2016 Polaris RZR XP 1000 High Lifter Edition 2016 Polaris RZR XP Turbo EPS 2016 Polaris RZR XP 4 1000 EPS 2016 Polaris RZR XP 4 Turbo EPS 2016 Polaris RZR XP 4 1000 High Lifter Edition 2014 Polaris RZR XP 1000 EPS 2014 Polaris RZR XP 4 1000 EPS 2015 Polaris RZR XP 1000 EPS 2015 Polaris RZR XP 1000 High Lifter Edition 2015 Polaris RZR XP 4 1000 EPS 2015 Polaris RZR XP 1000 EPS Fox Edition
Everyone in our riding group has had awesome experience using these guys control arms, so when we ordered ours we placed the order on a afternoon around 4:30 and needed them the next day and the awesome people that work for this company was able to get our control arms and several other things we ordered to us so we could ride that next weekend all within that next day. Even though everything was ordered last minute, we got everything we asked for and more. We also love our brand new setup along with these control arms!
Click here for High Lifter's warranty information.
This product comes with standard ball joints preinstalled.
WARNING: This product can expose you to chemicals including Chromium, which is known in the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
WARNING: This product can expose you to chemicals including Chromium, which is known in the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to 