Upper Radius Bar Kit Polaris RZR XP 1000 Spherical Bearing (10mm Bolt Size)

High Lifter improved the radius bar design by adding durable, adjustable heim joints and spherical bearings. Installation and maintenance are made easy with adjustable length and can be serviced with readily available parts. The simple bolt-on kit features heim joints for easy camber adjustment and spherical bearings for rugged durability. High Lifter's Radius Bars will give you the strength and clearance needed for peace of mind when riding.

Always check for bearing and brake wear before installation and replace if needed. We always recommend checking these parts before you start your installation to save time and get back on the trail sooner. See the Replacement Parts Tab to purchase replacement parts as needed.

Features:

• 50% larger than average stock bars - Crafted from 1 ¼" x .188" DOM steel tubing
• Simple bolt-on kit
• 5/8" heim joint
• Spherical bearings
• Most stock powder coat colors available in stock
• Step by step instructions complete with multi-images for a quick install
• Limited Lifetime Warranty

Note: 2017 Polaris RZR XP 1000 models have two different types of hardware connecting the rear factory radius bars: 10mm or 12mm bolts. Before purchasing radius bars for your 2017 Polaris RZR XP, you need to determine if you have 10mm or 12mm hardware. To determine this will be as simple as finding which socket is used to remove the center bolt holding the radius to the frame. For 10mm hardware you will use a 15mm socket. For 12mm hardware you will use an 18mm socket.

Note: This kit does not fit units that have 12mm factory bolts!