Our arms maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection, and visual appeal. Don’t be fooled with too much arch that puts your axles into greater risk of damage. Our precision manufacturing process ensures each control arm installs exactly like the factory arm. Depending on the model, most kits will have the High Lifter logo precision cut into the bracing.
Installation is made easy with our step by step and multi-image instructions. During installation, you can use stock bushings and ball joints for easy installation. Even better, High Lifter will install your ball joints before shipping. (See our control arms with preinstalled ball joints.)
Always check for bearings, bushings, ball joints, and brake wear before installation and replace if needed. We always recommend checking these parts before you start your installation to save time and get back on the trail sooner. See the Replacement Parts Tab to purchase replacement parts as needed.
Features:
Larger than average stock arms - Crafted from 1 1/16” DOM steel
Up to 2.5x the wall thickness of an average stock arms
Grease fittings included for most models
Added ground clearance featuring bends that maximize clearance and axle protection
Most stock powder coat colors available in stock
Easy to install and maintain
Limited Lifetime Warranty
Tire Fitment:
Largest Tire: 28” tire
Largest Tire with lift kit: 31” tire with 1” spacers for factory wheels
Our tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.
This kit comes with control arms only, no ball joints.
Ran these arms for 2 years with 6†portals and I’ve ran 37bkts and 40x10 BKT’s with these arms with zero issues. I buggy hard and are well built and handled the extra weight from portals ease! No reason to spend $700 on A Arms these are strong enough to handle anything. Only reason I took mine off was to install a lift. Don’t spend your hard on money on the $ 700 A Arms they say you must have on these FaceBook Defender pages go with a Highlifter there is a reason they have been around for as long as they have. They build durable parts!!!
Click here for High Lifter's warranty information.
This kit comes with control arms only, no ball joints.
WARNING: This product can expose you to chemicals including Chromium, which is known in the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov