Signature Series Lift Kit Polaris Ranger 400/500/800/EV Models

  • SKU:  PLK400R-50
  • Brand: High Lifter
  • Summary: Relocate your shock mounts and get the lift need for tighter suspension and larger mud tires! Our Signature Series lift consistently measures truer (and higher) than the competition!This kit fits Polaris Mid-Size Rangers with front struts only. This does not fit full-size Rangers with front upper and lower control arms with shocks.NOTE: You must upgrade the front factory CV axles with Outlaw DHT Axles for these models or an Axle Bar Kit.
  • $154.95

In Stock
Polaris Ranger 2” Signature Series Lift Kit

Bigger. Badder. BOLDER. Take your ATV to the edge with High Lifter’s 2” Signature Series Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 20 years perfecting the ultimate ATV lift kit. The product? The Signature Series Lift Kit is even easier to install with a bolt-on application that consistently measures truer over competitor products.

The High Lifter 2” Signature Series Lift Kit relocates the shock mounts to provide additional lift making room for larger tires and tightens suspension. Each Lift Kit part is precision cut and zinc plated for durability and reliability in any environment.

No other lift kit on the market can match the robust and rugged design of the Signature Series Lift Kit!

2” Signature Series Lift Kit Features:


· All hardware needed for successful installation
· High Lifter logo precision laser cut into each kit
· User-friendly instructions
· Bolt-on application; takes approximately 1-2 hours for install
· Zinc plated
· Front and rear lift


Tire Fitment:
PolarisRanger 400 - Up to 28"
Polaris Ranger 800 Mid-Size - Up to 28"
Polaris Ranger EV Electric - Up to 28"
Our stated tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.

Fits:
This kit fits Polaris Mid-Size Rangers with front struts only. This does not fit full-size Rangers with front upper and lower control arms with shocks.
Polaris Ranger 400 (09-14)
Polaris Ranger 500 & Ranger Crew 500 Mid-Size Only (11-13)
Polaris Ranger 800 Mid-Size Only (13-14)
Polaris Ranger EV Electric (10-14)

NOTE: You must upgrade the front factory CV axles with Outlaw DHT Axles for these models or an Axle Bar Kit. High Lifter Pro Series Axles or Gorilla axles are also acceptable upgrades.
Note: 1.5" spacers are required in the rear if you run factory wheels with a lift kit installed.
2011 Polaris Ranger 500 EFI CREW 4x4 Midsize
2011 Polaris Ranger 500 EFI 4x4 Midsize
2011 Polaris Ranger 400 4x4 Midsize
2010 Polaris Ranger 400 4x4 Midsize
2012 Polaris Ranger 500 EFI 4x4 Midsize
2012 Polaris Ranger 400 4x4 Midsize
2012 Polaris Ranger EV
2012 Polaris Ranger 500 EFI CREW 4x4 Midsize
2013 Polaris Ranger 800 Midsize
2013 Polaris Ranger 500 EFI 4x4 Midsize
2013 Polaris Ranger 400 4x4 Midsize
2013 Polaris Ranger EV
2013 Polaris Ranger 500 EFI CREW 4x4 Midsize
2014 Polaris Ranger 400 4x4 Midsize
2014 Polaris Ranger 800 Midsize
2014 Polaris Ranger EV

Product Ratings and Reviews

You must be logged in to add and read reviews. Please click here to login or create an account.

Add a Review

0 out of 5 stars

Click here High Lifter Lifetime Warranty for full warranty information.

Product Ratings and Reviews

You must be logged in to add and read reviews. Please click here to login or create an account.

Add a Review

0 out of 5 stars