OEM springs tend to fatigue rapidly even with low mileage. The High Lifter Lift Springs were engineered to provide about 100 additional pounds of capacity (per 4 set) over the new stock springs. They were also designed to make a significant difference in the performance of your ATV with as little affect as possible on the ride and handling of the machine. And here's a big bonus, a complete set of the Lift Springs may be installed for substantially less than the cost of one replacement OEM shock.
For those who ride at slower speeds, with big tires and heavier loads, the Lift Springs will be a welcome and economical upgrade. Depending on the make, model, and current modifications to the unit, the High Lifter Lift Springs have been known to add on full inch of suspension lift, however, it's not guaranteed. The Lift Springs add some stiffness to the ride and decrease roll, but have not been found harsh or uncomfortable by anyone who has ridden them. One thing is for sure. If you are a hardcore mud rider or you carry a load, your ATV could stand a heavier load capacity. The High Lifter Lift Springs are just what the doctor ordered!
Kit includes a pair of springs to lift the front of the unit.
Powder-coating the springs will void any warranty. If you wish to paint your springs, you must use a different method.
Springs vary by make and model.
Fitment note: Sportsman 800/570/500/450/400 (2012-2023) front REQUIRES Spring Adapter SPRP-ADAPTER
SPOT ON For the Rancher we put a plow on to give it just a bit more weight rating.
Thank you High Lifter!
Tuesday, January 25, 2022
Blake
Great product. Easy to install. Quality appears to be good, and makes a difference in the ride (2016 Sportsman 570).
Tuesday, April 13, 2021
alec garbutt
Revived my 2020 sportsman 570. I do a lot of towing and riding with 2 or 3 riders with my 570. when I would look at my rear a arms from the back the bike was flat across the bottom. the original springs wouldn't lift the bike up at all. i had only 5-6in of clearance... with one rider, no trailer. After i put these springs on the bike sits sooooo much higher, tows better, rides better, i did add a 2in lift as well which went good. Only thing i recomend is one of the spring compressor tools that are not jackscrew type. i used jackscrew type and this was extremely sketch and ive done a lot of springs before but because quad springs are thinner they wanted to bend to the side and shoot off. Buy a floor mounted spring compressor that uses leverage
Thursday, December 17, 2020
Andy
Installed these on my Polaris 570 Sportsman front end. Added 2" to the height. They were at 31.5" before installing. The OEM springs in the front had sagged a lot. I had installed rear springs a few months, so now it's High Lifter Springs all the way around. They're AWESOME!
Click here for High Lifter's warranty information.
WARNING: This product can expose you to chemicals including Chromium, which is known in the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov