A Huge Step Up in Strength!
This sub-frame stiffener has a 3D notch-and -tab design which greatly improves stiffness and strength when compared to other conventional frame stiffeners. When adding aftermarket products to your machine, often those products can rack up in weight. This frame stiffener provides a strong foundation so you can mount all the good stuff: suspension lifts, monster tires (Example: Outlaw 44" Magnum Tires), and portal lift kits. The weight of all those products can cause your frame to be less reliable and more likely to bend due to stress. Take that possibility out of the picture, you need this frame stiffener!
Gussets, gussets, and more gussets!
Our kits are designed with 3/16" steel plate and we use 10.9 grade hardware to mount to the frame. The kits are crafted to reinforce the a-arm mounting positions and prevent the tabs from stretching. We have added more gussets to give our kit rigidity, durability, and strength. Increase the longevity of your fame by adding this kit today!
Features:
NOTE: These kits may not work with aftermarket skid plates. Check with skid plate manufacturer to confirm if this kit is compatible with skid plate package.
This is a well engineered product that fit perfectly and is super strong. The only improvement would be to shorten the rear two bolts to provide only about three threads to protrude beyond the nylock feature of the nuts. This would facilitate getting the bolts in and allow the use of a combination wrench rather than just an open end wrench on the nuts.
Click here for High Lifter's warranty information.
WARNING: This product can expose you to chemicals including Chromium, which is known in the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
