The Max Clearance Rear Raked Upper and Lower Control Arms feature a single bend design giving you the MOST clearance you can get from the frame to the hub without adding a lift. By maintaining factory drivelines and positions, there’s no added wear and tear on your UTV components – including the CV axle joints.
The rearward rake is 1.5". The added ground clearance is up to 1.25". This product works with stock axles and with or without a High Lifter Lift Kit.
NOTES: Be sure to check for worn ball joints, bearings, and bushings before installation and replace them if needed.
Important: If you are purchasing this control arm set for a 2016-2017 Polaris General or 2017 RZR S 900/1000 you must also purchase part # BK-HLP-P-1.
For exact fitment that does not require replacement bushings for a 2016-2017 Polaris General or 2017 RZR S 900/1000 you must purchase part # MCRRA-GEN1.
2016 Polaris RZR 900 S EPS 2016 Polaris RZR 1000 S 2016 Polaris RZR 900 4 EPS 2016 Polaris RZR 900 S BASE 2015 Polaris RZR 900 S 2015 Polaris RZR 900 S EPS 2015 Polaris RZR 900 4 EPS