Front Forward Upper & Lower Control Arms Kawasaki Teryx

  • SKU:  MCFFA-KTRX-1-B
  • Category: Control Arms
  • Brand: High Lifter
  • Summary: Whether you ride in deep mud or over rocky trails, the need for stronger control arms with added ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and lack the added ground clearance needed for challenging trails. High Lifter has solved your problem by designing tough control arms, twice as strong as your stock arms, with the added ground clearance you need for all terrains and bigger tires.
  • Weight: 35
  • Length: 26
  • Width: 15
  • Height: 12
  • 359.96 USD$359.96
  • List Price: $399.95

In Stock

Our arms maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection, and visual appeal. Don’t be fooled with too much arch that puts your axles into greater risk of damage. Our precision manufacturing process ensures each control arm installs exactly like the factory arm. Depending on the model, most kits will have the High Lifter logo precision cut into the bracing.

Installation is made easy with our step by step and multi-image instructions. During installation, you can use stock bushings and ball joints for easy installation. Even better, High Lifter will install your ball joints before shipping. (See our control arms with preinstalled ball joints.) Always check for bearings, bushings, ball joints, and brake wear before installation and replace if needed. We always recommend checking these parts before you start your installation to save time and get back on the trail sooner. See the Replacement Parts Tab to purchase replacement parts as needed.

Features:

  • 25% larger than average stock arms - Crafted from 1 ¼” DOM steel
  • Up to 2.5x the wall thickness of an average stock arms - .188” wall thickness
  • Grease fittings included for most models
  • Added ground clearance featuring bends that maximize clearance and axle protection
  • Most stock powder coat colors available in stock
  • Easy to install and maintain
  • Limited Lifetime Warranty

Tire Fitment: 

Up to 31" 

Our tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.

Note: This kit includes an optional front lift bracket for lifted and non-lifted vehicles.

Note: When purchasing High Lifter Front and Rear Arms a separate lift kit is not required. High Lifter Front and Rear Arms provide shock mounts for both lifted and non-lifted options.

2016 Kawasaki Teryx 800 4 LE
2016 Kawasaki Teryx 800 4
2016 Kawasaki Teryx 800 LE
2016 Kawasaki Teryx 800
2012 Kawasaki Teryx 750 4
2013 Kawasaki Teryx 750 4
2014 Kawasaki Teryx 800 LE 4
2014 Kawasaki Teryx 800 4
2012 Kawasaki Teryx 750 4 EPS
2013 Kawasaki Teryx 750 4 EPS
2014 Kawasaki Teryx 800
2014 Kawasaki Teryx 800 LE
2015 Kawasaki Teryx 800
2015 Kawasaki Teryx 800 LE
2015 Kawasaki Teryx 800 4
2015 Kawasaki Teryx 800 4 LE
2017 Kawasaki Teryx 800 4 LE
2017 Kawasaki Teryx 800 4
2017 Kawasaki Teryx 800 LE
2017 Kawasaki Teryx 800
2018 Kawasaki Teryx 800 4 LE
2018 Kawasaki Teryx 800 4
2018 Kawasaki Teryx 800 LE
2018 Kawasaki Teryx 800
2019 Kawasaki Teryx 800 4 LE
2019 Kawasaki Teryx 800 LE
2019 Kawasaki Teryx 800 4
2019 Kawasaki Teryx 800

Product Ratings and Reviews

Add a Review

0 out of 5 stars
Be the first to review this product.

Click here High Lifter Lifetime Warranty for full warranty information.

Warning Warning: This product can expose you to chemicals including Titanium Dioxide, which is known in the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

Upper and Lower Ball Joints - BJK-1