7" Big Lift Polaris RZR S 900/S 1000 & General 1000 with DHT XL Axles

  • Category: Big Lifts
  • Brand: High Lifter
  • Summary: Take your lift to the extreme with the High Lifter 7" Big Lift Kit for the Polaris RZR S 900 and RZR S 1000. This all inclusive kit provides everything you need to clear tires up to 34.5" and conquer the gnarliest mud holes around. Does NOT fit 2016 RZR 900 S Base model (non-EPS) with the FOX Mono Shocks.General 1000 - Factory Bushings will NOT work with BIG LIFT, you must purchase Bushing Kits BK-HLP-1 (Front) and BK-HL-P-2 (Rear). This kit comes powder-coated in black or silver .Kits are available raw or in custom colors. Allow up to 5 days for powder-coating. Pro Staff discount is NOT available on this item.
  • Weight: 210
  • Length: 48
  • Width: 40
  • Height: 40

Bigger. Badder. BOLDER. Take your ATV to the edge with High Lifter’s 7" Big Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 20 years perfecting the ultimate ATV lift kit. The product? The Big Lift Kit is even easier to install with a bolt-on application that consistently measures truer over competitor products.

One of the first areas our team tackled was the steering. Large lifts are known for being difficult to steer. Our solution was superior engineering of steering components and hub location geometry that that provides excellent steering and maneuverability on the trails.

Each lift kit comes with four Outlaw DHT XL axles that are custom tuned for use with the 7” High Lifter Lift Kit.

Outlaw DHT XL Axle:

  • Dual heat treatments on the housings to improve toughness against shock loads without compromising bearing surfaces and long term life
  • Oversized CV joint housings to increase strength
  • Housings and bars made from 4340 Chromoly steel
  • Puncture-resistant boots which are durable in high and low temperature climates
  • Molybdenum disulfide, anti-oxidation, rustproof, and high-performance

This 7" lift kit package includes the following components:

  • Heavy duty laser cut front and rear upper lift/shock relocation brackets
  • Eight custom heavy duty Max Clearance Control Arms crafted from 1 1/4"x.120 wall DOM tubing, heavy duty support gussets, and shock mounts
  • Four Outlaw DHT XL Axles
  • Custom tie rods with heim-style rod ends
  • Custom rear brake line kit
  • All required hardware
  • Detailed instructions with step-by-step photos

Does NOT fit 2016 RZR 900 S Base model (non-EPS) with the FOX Mono Shocks.

General 1000 - Factory Bushings will NOT work with BIG LIFT, you must purchase Bushing Kits BK-HLP-1 (Front) and BK-HL-P-2 (Rear). The installation of the Big Lift on the General requires the removal of the factory sway bar on the front.

General with Standard Shocks without reservoir, flip the shock to work with upper lift brackets and lower control arms.

General with Fox Style or reservoir shocks, proceed with installation as laid out in the instructions.

 

 

2016 Polaris RZR 900 S EPS
2016 Polaris RZR 1000 S
2016 Polaris General 1000 EPS
2016 Polaris General 1000 EPS Deluxe
2015 Polaris RZR 900 S
2015 Polaris RZR 900 S EPS
2017 Polaris General 1000 EPS
2017 Polaris General 1000 EPS Deluxe
2017 Polaris RZR 1000 S EPS
2017 Polaris RZR 900 S EPS
2018 Polaris General 1000 EPS
2018 Polaris General 1000 EPS Deluxe
2018 Polaris General 1000 EPS Premium
2018 Polaris General 1000 EPS Ride Command
2018 Polaris RZR 900 S
2018 Polaris RZR 1000 S

Product Ratings and Reviews

You must be logged in to add and read reviews. Please click here to login or create an account.

Add a Review

0 out of 5 stars

Click here High Lifter Big Lift with Outlaw DHT XL Axles Warranty for full warranty information.

Product Ratings and Reviews

You must be logged in to add and read reviews. Please click here to login or create an account.

Add a Review

0 out of 5 stars