Take your machine to the next level with High Lifter's APEXX 9" Big Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most terrains. This kit also features the strongest front and rear control arms on the market. With 1.5" DOM steel tubing, these arms add power, durability, and support to your machine so it can withstand the abuse of a good ride.
The lower arms feature an adjustability component in the bushing collars to adjust camber that can come from the addition of lift kits, portals, or larger tires. When the kit is set to the factory position, you have 3/8" of adjustability camber in and out. Heat treated and plated adjustable bushing collars allow you to be confident in the strength you're adding to your ride. This kit comes packaged and preadjusted to the factory position, and factory bushings and caps should be used for installation.
Outlaw DHT XL Axle:
This 9" lift kit package includes the following components:
Tire Fitment:
Up to 38" Outlaw 3
Up to 44" Magnum with High Lifter Portals
Our tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.
Click here for High Lifter's Outlaw DHT XL Big Lift Axle Warranty Program.
WARNING: This product can expose you to chemicals including Chromium, which is known in the State of California to cause cancer and birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov