what does it take to run 30's or 31's

Our Gift to You! 1yr Paid Subscription to Quad Off Road!


	[All Forums] [Most Popular] [HL Related] [OEM] [Swap Shop] [Scott's Pics]	Chat Inbox

what does it take to run 30's or 31's

View related threads: (in this forum | in all forums)

Logged in as: Guest

Users viewing this topic: none

Printable Version

All Forums >> [OEM Discussions] >> Can-Am BRP >> what does it take to run 30's or 31's

Page: [1]

Message

<< Older Topic Newer Topic >>

what does it take to run 30's or 31's - 9/2/2008 10:08:10 PM

bar5721

Posts: 32
Joined: 3/18/2008
From: Vicksburg,MS
Status: offline

i have the two inch bracket lift on the front .. i was wondering if i put on the back piece of the highlifter lift and some 1 inch springs .. and bought the monkey axles... can i run 30 or 31's with out taking away the regular riding... bc i know my bike will run them ..

_____________________________

Can am 800 ...yellow with 28 inch ****s on some 108 SS rims 12inch and 2 inch highlifter lift... and ram cup holder... snorkled ,, HMf quite racing series pipe and hmf programer... custom radio..

04 Honda foreman 450 with snorkel and hmf ,, jet kit... 26 inch vampires with ITP rims... gun rack.. highlifter spring kit.. 3,000 pound warn winch..

Post #: 1

RE: what does it take to run 30's or 31's - 9/3/2008 2:19:13 PM

Jfree

Posts: 650
Joined: 9/14/2006
Status: offline

U don't need the monkey axles to run that set up. Ive been running that similar setup for over a yr and still have the OEM axles. Just gotta know how to control the thumb.

===============
08 RZR
07 Can Am xt camo - 31" laws x4 on ITP SS108s black, 2" pipe lift up front w/HL's 2" lift. Ram cup holder, snorkled, HMF pipe (snorkled) and programmer, HL triple flow Radiator relocated, UNI air filter, thumb saver extension (best bang for the buck)
02 Vinson 500

(in reply to bar5721)

Post #: 2

RE: what does it take to run 30's or 31's - 9/3/2008 2:23:07 PM

Jfree

Posts: 650
Joined: 9/14/2006
Status: offline

oh yea, the ride is much stiffer but there's no sag and no rubbing issues. I did have to trim the back edge of the floor board about a half an inch and I also took a heat gun to the left inner fender panel. I also have a EPI clutch kit w/a HL pro series belt.

(in reply to Jfree)

Post #: 3

RE: what does it take to run 30's or 31's - 9/3/2008 4:06:39 PM

James Chapman

Posts: 1746
Joined: 2/28/2008
From: Spring TX **USA**
Status: offline

Yea Can Am axles are some of the strongest if not THE strongest OEM axle out...run them till they break

_____________________________

Support our Military and their mission

00 Dakota 4wd
BFG A/T's
Cherry Bomb

She's fast . She's real fast.

Past bike 08 brute

(in reply to Jfree)

Post #: 4

RE: what does it take to run 30's or 31's - 9/7/2008 5:37:16 PM

bar5721

Posts: 32
Joined: 3/18/2008
From: Vicksburg,MS
Status: offline

thanks for the info guys .. but i have a heavy thumb .. i like to go fast to ..

_____________________________

Can am 800 ...yellow with 28 inch ****s on some 108 SS rims 12inch and 2 inch highlifter lift... and ram cup holder... snorkled ,, HMf quite racing series pipe and hmf programer... custom radio..

04 Honda foreman 450 with snorkel and hmf ,, jet kit... 26 inch vampires with ITP rims... gun rack.. highlifter spring kit.. 3,000 pound warn winch..

(in reply to James Chapman)

Post #: 5

RE: what does it take to run 30's or 31's - 9/8/2008 7:24:49 PM

bowers_renegade

Posts: 22
Joined: 9/6/2008
Status: offline

build you some floorboards buddy out of diamond plate flat metal! really nothing to it! runnin 32 ****s with absolutely no lift factory axles! absolutely no problems!

_____________________________

07 renegade
32sbacks
hmf exhaust
dynojet opt
k&n air

(in reply to bar5721)

Post #: 6