rejetting eiger

Our Gift to You! 1yr Paid Subscription to Quad Off Road!


	[All Forums] [Most Popular] [HL Related] [OEM] [Swap Shop] [Scott's Pics]	Chat Inbox

rejetting eiger

View related threads: (in this forum | in all forums)

Logged in as: Guest

Users viewing this topic: none

Printable Version

All Forums >> [OEM Discussions] >> Suzuki >> rejetting eiger

Page: [1]

Message

<< Older Topic Newer Topic >>

rejetting eiger - 8/14/2008 9:27:54 PM

dusty

Posts: 36
Joined: 5/5/2008
Status: offline

can i rejet my eiger for more power without putting a performance exhaust on it. and what size jet do i use i have a 122 and a 50 something in it stock i need to know what size i need to go to for best performance and whether i change the high speed or low speed jet.

< Message edited by dusty -- 8/14/2008 9:29:21 PM >

_____________________________

2006 eiger
2" HL lift
26" super swampers all the way around
more to come

Post #: 1

RE: rejetting eiger - 8/14/2008 11:02:04 PM

huffranger4x4

Posts: 54
Joined: 6/25/2007
From: Cumberland, Maryland
Status: offline

your bike is jetted lean from the factory to pass emissions...your best bet of getting more power without a pipe is to open up the aire box and jet up a few sizes on the main jet....a lean engine is going to produce more power than a rich running engine, however a richer mixture is safer and more reliable...if you do jet up on the pilot jet i wouldnt jet any higher than the next size up...hope this helps!

_____________________________

07 KQ700 (black)
3in lift
27in XTR's on 14" ss112's
dalton clutch kit
audiopipe
Warn XT30 winch w/ wireless remote
rear trunk

soon to come....
HID conversion headlights
HL springs

(in reply to dusty)

Post #: 2