RE: Make a list of common numbers we need
Keyword Search Keyword Search
2008 High Lifter Edition Polaris Sportsman 800HO

RE: Make a list of common numbers we need

 
View related threads: (in this forum | in all forums)

Logged in as: Guest
Users viewing this topic: none
  Printable Version
All Forums >> [OEM Discussions] >> Polaris >> RE: Make a list of common numbers we need Page: <<   < prev  2 3 4 [5] 6   next >   >>
Login
Message << Older Topic   Newer Topic >>
RE: Make a list of common numbers we need - 11/5/2007 12:05:39 PM   
223s

 

Posts: 65
Joined: 12/3/2006
Status: offline 		I need  fan motor or fan for a 2003 Sportsman 700. Anybody know a # for it.
Thanks

(in reply to jimmypsp700)
Post #: 121
RE: Make a list of common numbers we need - 11/5/2007 12:22:05 PM   
popotoys

 

Posts: 32
Joined: 9/20/2007
Status: offline 		measure you bolt pattern for attachment to the rad and then call your local Spal dearler.

http://www.spal-usa.com/

(in reply to 223s)
Post #: 122
RE: Make a list of common numbers we need - 11/15/2007 7:19:17 AM   
GARYK2303

 

Posts: 36
Joined: 3/13/2005
From: PA
Status: offline 		       Hi everyone can anybody tell me where i can get a coil for an SP800. My coil wore through and started shorting out on the frame where it is mounted.  In my opinion this part is very poor, i sealed it up with silicone and am currently using it. Prior to sealing it up when it got wet my bike would run terribly without any power. I am thinking about buying a new coil and the spacer that they  now are using. Thank you.

_____________________________

2005 Polaris Sportsman 800 , Warn winch , 28" ITP 589's

(in reply to popotoys)
Post #: 123
RE: Re: Make a list of common numbers we need - 11/15/2007 4:41:41 PM   
Crash99

 

Posts: 1
Joined: 11/15/2007
Status: offline 		I`m looking for a fan/motor for a 500 HO 2005. Do you have any number to help. The number I saw  in the common list was non water proof.

Thanks!

(in reply to wcpete)
Post #: 124
RE: Re: Make a list of common numbers we need - 11/15/2007 4:51:04 PM   
PolarisTodd


Posts: 841
Joined: 1/13/2006
From: Smyrna, Tennessee
Status: offline
quote:

ORIGINAL: Crash99

I`m looking for a fan/motor for a 500 HO 2005. Do you have any number to help. The number I saw  in the common list was non water proof.

Thanks!



Spal fan #30100597. You will have to use your shroud and blade. The plug and motor are exactly the same as what comes with the bike. $74.96 plus shipping. Only took 10 minutes to swap the blade and shroud over to the new motor. No cutting or splicing any wires.

Spal Phone # 1-800-345-0327 
Spal Website: http://www.spalusa.com/
The people at Spal are great. Easy to talk to and soooooooooooo helpful.
 
 
Rear Wheel Bearings:
Federal-Mogul Bearings 510013 


Thanks to polaristodd for the help and info.  

 

_____________________________

Polaris 500H.O.
Heel Clicker
Supertrapp IDSX Full System
DynoJet Kit
K&N
Warn 2.5ci
Synthetic Rope
Highlifter Lift Springs
Swamp Witch 28's
Vision Wheels with 1.5" spacers all around.
Lot's of MONEY on Polaris required maintenance

(in reply to Crash99)
Post #: 125
RE: Re: Make a list of common numbers we need - 11/28/2007 1:10:47 PM   
Newfie Polaris

 

Posts: 28
Joined: 4/20/2007
Status: offline 		OK, guys ive searched the post about 200 times, im looking for front bearing numbers for an 06 500 efi, if anyone can link me to it if im missing or if anyone knows the actual number off these bearings it would be a big help, a local bearing guy sells em for 5.99 race and cup and seal, he needs the number off the bearing itself to match up,
Are the front bearings the same in the 500, 600, 700 , 800?

(in reply to PolarisTodd)
Post #: 126
RE: Re: Make a list of common numbers we need - 11/28/2007 9:37:40 PM   
PolarisTodd


Posts: 841
Joined: 1/13/2006
From: Smyrna, Tennessee
Status: offline
quote:

ORIGINAL: Newfie Polaris

OK, guys ive searched the post about 200 times, im looking for front bearing numbers for an 06 500 efi, if anyone can link me to it if im missing or if anyone knows the actual number off these bearings it would be a big help, a local bearing guy sells em for 5.99 race and cup and seal, he needs the number off the bearing itself to match up,
Are the front bearings the same in the 500, 600, 700 , 800?


just search and read this post/topic. bearings are availabe from parts dealers (advance auto etc.) for about 25.00. less than that be leary 

_____________________________

Polaris 500H.O.
Heel Clicker
Supertrapp IDSX Full System
DynoJet Kit
K&N
Warn 2.5ci
Synthetic Rope
Highlifter Lift Springs
Swamp Witch 28's
Vision Wheels with 1.5" spacers all around.
Lot's of MONEY on Polaris required maintenance

(in reply to Newfie Polaris)
Post #: 127
RE: Re: Make a list of common numbers we need - 11/29/2007 1:34:34 PM   
Newfie Polaris

 

Posts: 28
Joined: 4/20/2007
Status: offline 		Well, i dont have Advance auto tech here in the maritimes in Canada, and all i need is a number from one of the bearings to match, and to that, like i asked, are the bearings the same for the different sizes of machine?

(in reply to PolarisTodd)
Post #: 128
RE: Re: Make a list of common numbers we need - 11/29/2007 1:50:09 PM   
Big_T


Posts: 2734
Joined: 6/7/2007
From: Milwakuee, WI
Status: offline 		yes, 500, 700, 800, etc all used the same bearings.

_____________________________

2007 Polaris X2 on 27" Mudzillas or BigHorns
Split audiopipe (self built)
Heelclicker

2008 Dodge Ram BigHorn 4x4 to haul it with

"Don't make me use my caps lock!!"

http://s164.photobucket.com/albums/u39/nennti/

(in reply to Newfie Polaris)
Post #: 129
RE: Re: Make a list of common numbers we need - 11/29/2007 3:41:00 PM   
Newfie Polaris

 

Posts: 28
Joined: 4/20/2007
Status: offline 		Thank you Big T

(in reply to Big_T)
Post #: 130
RE: Re: Make a list of common numbers we need - 12/16/2007 9:28:50 AM   
DaButcher


Posts: 213
Joined: 1/11/2007
From: North East TEXAS
Status: offline 		Sportsman 800 fuel pump
Airtex E8198   $79.97
OEM pump  $452

_____________________________

Mud Mafia
"We're in tha trash talkin business..........and business is good"

DaButcher Myspace
Mud Mafia Myspace
Pics
06 800 Sportsman
G O R I L L A lift
29.5 Outlaws

(in reply to wcpete)
Post #: 131
RE: Re: Make a list of common numbers we need - 12/21/2007 5:55:03 PM   
2PO4me


Posts: 125
Joined: 4/27/2007
From: Georgia
Status: offline 		oil drain plug for a 05 700 sportsman? want a socket head to replace the allen head

_____________________________

05 Sportsman 700 stock till i get some$$$$$$
00 Explr 400 2 stroke, s. swampers, clutch kit, broke and scratched but still puttin
http://i158.photobucket.com/albums/t115/rek1015/meandsean.jpg

(in reply to DaButcher)
Post #: 132
RE: Re: Make a list of common numbers we need - 12/22/2007 8:17:59 PM   
DaButcher


Posts: 213
Joined: 1/11/2007
From: North East TEXAS
Status: offline 		Outstanding 30,000 hits on this thread!!!!!

Hope it has helped others as much as it has me.

    

DaButcher, formerly  SemperVigilo

_____________________________

Mud Mafia
"We're in tha trash talkin business..........and business is good"

DaButcher Myspace
Mud Mafia Myspace
Pics
06 800 Sportsman
G O R I L L A lift
29.5 Outlaws

(in reply to 2PO4me)
Post #: 133
RE: Re: Make a list of common numbers we need - 12/24/2007 10:59:57 PM   
Honda_Man_09


Posts: 1054
Joined: 11/6/2005
From: Natchez, MS
Status: offline 		Is the part # for the front ranger springs you guys are using on atvs to prevent front end sag 7043094-067? Thanks

_____________________________

FOR SALE! pm me for details
2008 Polaris 800 H.O. EFI
29.5 laws on Chrome Vision 159s
Snorkeled
2" HL lift up front
Ranger springs front and rear
HL Clutch kit
Front and Rear bumpers
Warn winch
Extended Warranty

(in reply to DaButcher)
Post #: 134
RE: Make a list of common numbers we need - 12/26/2007 9:23:54 PM   
gcharlesadamsjr

 

Posts: 1
Joined: 12/13/2007
Status: offline 		Hello,

Thanks for all the parts subsitutions! Motivated me to quit feeding the Polaris monkey and do a bit of detective work.

I have found a universal joint to add to the ever-growing list. Note: these are smaller than the u-joints listed for earlier in this thread for larger ATV's.

2001 500 Sportsman HO RSE
Polaris part number 2200771
Cost: $72.79 ea. online at World of Powersports (I really hope this was a typo)
 
I measured my u-joint and went to Advance Auto Parts and found someone who could find the paper catalog that list the size of all available u-joints. Had to order the part and had it the next business day.
 
Advance Auto part number 1-0121
Brand name: neapco (some Italian flavor U-joint I never heard of previously)
Cost: $16.96 ea.
 
This part number fits all four locations. Make sure you measure the removed part and the new one. I actually had one of the four that was about .020 too long. Luckily this was the first one I installed so I measured it. All of the others were within spec. ( I took a grinder to the bad one to avoid ordering another and avoided having to walk to my secluded hunting spot again!)
 
I bought my Polaris used and I have cursed it ever since because I work on it more than I ride it (proven fact). I have to admit that all of the failures to date stem from lack of maintainence. Check your fluid levels especially in the front hubs. If they dry up which causes extreme heat, the garter spring turns into spagetti and it will lock the hub into 4WD when you are at high speed. You will have a wild ride turning hard left or right at best! At worst you will flip.  While I was fixing this issue, I discovered the front diff was almost empty and had water in the gear oil due to a worn and leaking seal. Also noted the u-joints were toast (no grease in them).
 
Maintain you ATVs! If you don't they might try to kill you.
 
Hope this helps,
 
 


_____________________________

Charles
2001 Sportsman 500 HO RSE (for fun)
1991 Yamaha YFM250B (for when I want to get there)

(in reply to SemperVigilo)
Post #: 135
RE: Make a list of common numbers we need - 1/7/2008 9:15:56 AM   
alivenwellntx

 

Posts: 78
Joined: 4/25/2006
From: Baytown ,Tx
Status: offline 		I just got off tha phone with tha guys at SPAL and the person i talked to said they dont sell just tha fan motor....i gave them tha part number off tha factory fan that came off my 06 700 sportsman and they gave me a part number of 3010 2022 and told me that was the same waterproof fan that i had in front of me and it cost $173.20......still cheaper then polaris....if anyone knows something or someone at SPAL we need to talk to to get one of those $75 fan motors it would be a big help to me and everyone else im sure

_____________________________

06 700 yellow with some stuff done to it
00 500 army green with a lift and some tires


Gary

(in reply to gcharlesadamsjr)
Post #: 136
RE: Make a list of common numbers we need - 1/7/2008 9:29:24 AM   
brutebog650


Posts: 1141
Joined: 3/20/2007
From: N.E. Houston (Dayton)
Status: offline 		i got a fan from oreillys for $60 on saturday. one of those "rapid cool" universal 12in fan.  works great so far.

_____________________________

07 Sportsman 700 EFI Red-29.5's-3in lift-HotSeat Dual Pipes-Deepdish Torks-Brushguard-Rear Bumper-Rack Extenders-Backrest-Cupholder-Ice Chest-Triangle Snorkels-Ammo Box-OtterBox Ipod Case/Mount-Speaker Box-HIDs

05 F150 supercrew lariat 4x4 loaded-5.4-Pipes-SCT SFD-HIDs-more to come


MYSPACE

(in reply to alivenwellntx)
Post #: 137
RE: Make a list of common numbers we need - 1/7/2008 2:13:27 PM   
DOZER77


Posts: 181
Joined: 3/15/2006
From: Spring, Tx
Status: offline 		This is the one I have on my 800
Had to use the shroud and plug off the old one, but it pulls more air and is a spal fan


http://cgi.ebay.com:80/ebaymotors/11-SPAL-ELECTRIC-PULLER-FAN-1390CFM-SPAL-30102054_W0QQcmdZViewItemQQcategoryZ33600QQihZ020QQitemZ300183755923QQrdZ1QQsspagenameZWDVW

_____________________________

2005 Sportsman 800
a couple of bumpers
a pull you out thang
Bling Bling wheels
and mud slinging tires

(in reply to brutebog650)
Post #: 138
RE: Make a list of common numbers we need - 1/7/2008 6:04:12 PM   
alivenwellntx

 

Posts: 78
Joined: 4/25/2006
From: Baytown ,Tx
Status: offline 		tha one your talking about David is tha one i got on mine now thats going out after three rides....they do ok if your in a bind and just cant wait on tha right one but they aint waterproof and wont last very long .

_____________________________

06 700 yellow with some stuff done to it
00 500 army green with a lift and some tires


Gary

(in reply to DOZER77)
Post #: 139
engine mount replacement - 1/28/2008 5:34:53 AM   
DaButcher


Posts: 213
Joined: 1/11/2007
From: North East TEXAS
Status: offline 		NAPA Part Number is 602-1069, very close motor mount replacement. Appears to be a tiny bit taller. Uncomfirmed, found this on another forum.



_____________________________

Mud Mafia
"We're in tha trash talkin business..........and business is good"

DaButcher Myspace
Mud Mafia Myspace
Pics
06 800 Sportsman
G O R I L L A lift
29.5 Outlaws

(in reply to SemperVigilo)
Post #: 140
RE: Re: Make a list of common numbers we need - 4/5/2008 2:48:12 PM   
RBarnett95

 

Posts: 22
Joined: 3/22/2008
Status: offline 		Just another number for ya'll.   Carter fuel pump # E7000 is the same as a 05 700 efi.  I bought it at oriely for 89.99.  The only difference is the strainer that comes with it will not work..  You will have to use your stock or have them find one that will work..

_____________________________

05 PoPo 700 28" Mudlights, 2" lift, Big Radio, Lots of lights

(in reply to wcpete)
Post #: 141
RE: Re: Make a list of common numbers we need - 4/25/2008 10:02:26 PM   
Sledgehammer

 

Posts: 71
Joined: 4/8/2008
From: Haynesville, Louisiana
Status: offline 		Are the federal-mogul 510013 bearings the same ones that fit the 06 polaris 700 efi in place of the rear wheel bearings?

_____________________________

06 Polaris 700 EFI 07 Arctic Cat 650H1 http://www.myspace.com/Sledgehammer1579

(in reply to RBarnett95)
Post #: 142
RE: Re: Make a list of common numbers we need - 4/26/2008 7:55:38 AM   
RBarnett95

 

Posts: 22
Joined: 3/22/2008
Status: offline 		Yes that is the rear wheel bearings..  I got them in mine no problems..

_____________________________

05 PoPo 700 28" Mudlights, 2" lift, Big Radio, Lots of lights

(in reply to ojpearce05)
Post #: 143
RE: Re: Make a list of common numbers we need - 5/6/2008 7:22:46 PM   
geardoc

 

Posts: 30
Joined: 5/6/2008
Status: offline 		Found the factory cooling fans today for only $61.95. This is the exact fan that came on my 99 Sportsman 500. Its the first (pull version) shown. http://www.jaycorptech.com/showproduct.aspx?productid=9

(in reply to RBarnett95)
Post #: 144
RE: Re: Make a list of common numbers we need - 5/7/2008 4:53:22 PM   
Sledgehammer

 

Posts: 71
Joined: 4/8/2008
From: Haynesville, Louisiana
Status: offline 		Put the fed mogul bearings in my 06.  Working great!!!  Thanks for the help.  Now anyone have a match for the front wheel bearings?

_____________________________

06 Polaris 700 EFI 07 Arctic Cat 650H1 http://www.myspace.com/Sledgehammer1579

(in reply to geardoc)
Post #: 145
RE: Re: Make a list of common numbers we need - 5/7/2008 5:55:08 PM   
DaButcher


Posts: 213
Joined: 1/11/2007
From: North East TEXAS
Status: offline
quote:

ORIGINAL: Sledgehammer

Put the fed mogul bearings in my 06.  Working great!!!  Thanks for the help.  Now anyone have a match for the front wheel bearings?


510014

_____________________________

Mud Mafia
"We're in tha trash talkin business..........and business is good"

DaButcher Myspace
Mud Mafia Myspace
Pics
06 800 Sportsman
G O R I L L A lift
29.5 Outlaws

(in reply to Sledgehammer)
Post #: 146
RE: Re: Make a list of common numbers we need - 5/19/2008 10:25:06 AM   
alforddm

 

Posts: 1
Joined: 5/19/2008
Status: offline 		We are replacing the front wheel bearings in a 2001 Sportsman 500 ho 4x4.  We have the Timken bearing numbers but when we went to the parts store to get them they didn't have the Timken so cross referenced them to a different brand and the bearing cup weren't included with the bearings.  Do these normally come without the bearing cups?  If so does anyone have parts numbers for the bearing cups?  The bearing numbers are Timken-L44643 and Timken-L44649.





Thanks,

Daylene

(in reply to DaButcher)
Post #: 147
RE: Re: Make a list of common numbers we need - 5/20/2008 10:43:47 PM   
jmunson_3


Posts: 203
Joined: 3/28/2007
From: Deer Park, TX
Status: offline 		This is a match for the oil filter on a sportsman 500, the link has other bikes too but I'm not sure about the twin bikes.  I have actually found this filter at my local Wal-mart. Hope this helps someone.


http://www.power-21.com/HoneywellPower21i/RelatedInfo.aspx?b=F&f=FRAM/framrv_atv_1210.pdf


This is the link to the fram parts catalog for atv and pwc.

Sortsman X2 2007-2008 . . . . . . . . . . . . PH6017A
Sportsman 500 1997-1999 . . . . . . . . . . . PH6017A
Sportsman 500, 6x6 2000-2008 . . . . . . . PH6017A
Xplorer 500 1997 . . . . . . . . . . . . . . . . . PH6017A
800cc
Sortsman X2 2007 . . . . . . . . . . . . . . . . PH6017A

_____________________________

07 Sportsman
500 H.O. EFI
3000 Viper Max
27 in. outlaws
stealth snorkel
stereo, backrest and of course CUP HOLDER!


http://www.myspace.com/jmunson3

(in reply to alforddm)
Post #: 148
RE: Make a list of common numbers we need - 5/24/2008 7:41:16 AM   
02POPO

 

Posts: 12
Joined: 4/21/2008
From: Florida
Status: offline 		Not sure if this was posted.  700 front wheel bearing specs per BCA.

Ball Bearing Bore=1.378" Outer Diameter=2.5197" Width=1.4567" Inner Race Radius=0.165"

Maybe cross refferance at your local bearing dealer.

(in reply to SemperVigilo)
Post #: 149
RE: Make a list of common numbers we need - 6/27/2008 7:09:39 AM   
bopfly


Posts: 152
Joined: 1/2/2008
From: Locust Grove, Ga.
Status: online 		We started using NGK Iridiums on our machines and so far so good.  We were fouling out the regular NGK's pretty quickly.  I'm assuming the problem was the programmers on our machines.  Anyway here's the ones we're using on our twins, including the RZR.

BKR7EIX - NGK Iridium Spark plug (we're paying 8.69 at Summit Racing)
BKR7E - Regular NGK plug (this one is 1.99 at Summit)

_____________________________

'08 RZR
Front BrushGuard Bumper
SS 106 Rims with 28" MST's
Sport Top
1/2 Windshield
2" Lift
1 1/2" Spacers All Around
Dual HMF's
FI Controller
Fender Flares
KMS Intake
Quad Tech Hood

'05 Sportsman 700
2" HL Lift
Aeen Exhaust
Jetted
26" Mudlites on ITP Type 5's- Looking to upgrade

http://community.webshots.com/user/bopfly

(in reply to 02POPO)
Post #: 150
Page:   <<   < prev  2 3 4 [5] 6   next >   >>
All Forums >> [OEM Discussions] >> Polaris >> RE: Make a list of common numbers we need Page: <<   < prev  2 3 4 [5] 6   next >   >>
Jump to: