stock axles and 29.5's

stock axles and 29.5's

stock axles and 29.5's (Full Version)

All Forums >> [OEM Discussions] >> Arctic Cat

Message

chevy69k20 -> stock axles and 29.5's (10/2/2008 4:14:31 PM)
How easy should i take it on my bike with stock axles and 29.5 outlaws? I also have snorkels, jet kit, HMF and a 2" lift just so you know.

GWC -> RE: stock axles and 29.5's (10/2/2008 4:16:23 PM)
Just be carfull when it gets in a bind because thats when it will bust one.

BrokenKitty -> RE: stock axles and 29.5's (10/2/2008 7:06:39 PM)
I would get the axle spacers because with the lift it wants to pop your front axles out and also if you ride easy your quad is gona handle the tires . I do to have stock axles and i ride it easy a no troubles at all .

chevy69k20 -> RE: stock axles and 29.5's (10/2/2008 9:49:39 PM)
Ok, thanks guys..... that makes me feel better....... I actually ordered the spacers and they will be shipped tomorrow......

Cole Boatright -> RE: stock axles and 29.5's (11/12/2008 8:50:21 PM)
Hey shawn, where do you get these axle spacers?

redneck36049 -> RE: stock axles and 29.5's (11/12/2008 8:52:15 PM)
pm 700blaze

turbocoupe88 -> RE: stock axles and 29.5's (11/12/2008 8:53:26 PM)
also dont turn the wheels with the locker on or else your taking a chance of breaking a cup. i ran my 07 650h1 for 500+ miles with 29.5 laws never broke an axle, its just a matter of knowing when to pull the winch cable out.

chevy69k20 -> RE: stock axles and 29.5's (11/12/2008 9:01:09 PM)
Hey Cole..... 700blaze will fix you up! They're really easy to install too.

Cole Boatright -> RE: stock axles and 29.5's (11/12/2008 9:03:48 PM)
Ok, I'll send him a PM. He doesn't live to far from here in Missouri, some day I am gonna get together with him to go ridin, I'll contact ya when we do.

chevy69k20 -> RE: stock axles and 29.5's (11/12/2008 9:06:52 PM)
sounds good!

Cole Boatright -> RE: stock axles and 29.5's (11/12/2008 9:09:37 PM)
Have you heard of the Brownstown mudfest? www.midillinoismudfest.com I met 700Blaze over there in september. Its a pretty good time. They have another event May 3. I'll be there, you should think about that.

chevy69k20 -> RE: stock axles and 29.5's (11/12/2008 9:14:36 PM)
HE!! yes i'll be there!! The Duramax will be on 38's by then too!

catkrazy -> RE: stock axles and 29.5's (11/12/2008 9:15:30 PM)
I'm as easy on the throttle as I think anyone gets, yet I've shatered 2 rears in almost back to back weekends. It wasnt from the mud riding it was traveling from point A to B to other mud holes LOL. Do like GWC says, and DO NOT get it in a bind. I will say that the two I broke, were the last remaining stock 03 axles (which explains alot!) I had left. Ive since replaced them with 06+ axle shafts with 03 ouboard joints and 06+ inboard joints. I do have G O RI LL A'S coming though for the rear. Also, i've came out of some nasty, off camber, thick, muddy ruts with the locker on, and never busted a joint thus far. Only shattered rear axels from being wedged, and being to wide. Gave it a little throttle and SNAP! lol I believe the axels I have now are MUCH sronger than the 03's. They are the silver colored shafts, and much bigger round.

Page: [1]

Forum Software © ASPPlayground.NET Advanced Edition 2.5.5 Unicode