Brake pads

Brake pads (Full Version)

All Forums >> [OEM Discussions] >> Can-Am BRP



Message


BlackBarron -> Brake pads (9/30/2008 9:02:17 PM)

are there any better brake pads then factory for the renegade. i need some new ones and wanted to get some suggestions on new pads. thanks




rancher12 -> RE: Brake pads (10/1/2008 6:40:54 AM)

EBC severe duty and you'll be good.  my local dealer doesn't even sale the factory brakes, they have EBC as replacements.  HAve lasted a long time so far




gotro -> RE: Brake pads (10/1/2008 8:17:14 AM)

I put the EBC pads on my bike better than stock but not much 




muddyfuzzy -> RE: Brake pads (10/1/2008 11:48:42 AM)

ebc sintered metal, the only way to go.




NBM -> RE: Brake pads (10/1/2008 11:14:22 PM)

Renegade 800's have sintered pads from the factory. I would still use EBC's though as they are around $40.00 cheaper per side in the front and rear saving U $120.00 if U doo all 3 at one time.




BlackBarron -> RE: Brake pads (10/2/2008 6:40:02 PM)

thanks alot [:D]




DaveB -> RE: Brake pads (10/2/2008 9:42:57 PM)

SBS pads....wore the stockers out in ONE ride. Have had the SBS's in there for two seasons now.....I looked the other day, about 50% left still.




matprice -> RE: Brake pads (10/4/2008 10:02:58 AM)

quote:

ORIGINAL: gotro

I put the EBC pads on my bike better than stock but not much 

Gotro, did yo uget them local? i need some




gotro -> RE: Brake pads (10/4/2008 5:36:05 PM)

Yes Matt I got them from competition they keep them in stock I changed all 3 disc around July 29th and my rear is worn all the way and the fronts have about 25% left on them.  I try not to use my brakes that much only when needed but I think the type of condition we ride in the pads will never last long.




Page: [1]



Forum Software © ASPPlayground.NET Advanced Edition 2.5.5 Unicode