Sparkplug -> how to Snorkel a wolverine (9/3/2008 6:24:53 PM)
I have a 03 wolverine and i wanted to know how to snorkel it
Muddin_dude05 -> RE: how to Snorkel a wolverine (9/3/2008 10:52:40 PM)
A few pictures in my sig, the piece comming out of the airbox is a modified 2" DMW p-trap. Use Epoxy "plastic welder" from NAPA for that piece.
JKPFORCE07 -> RE: how to Snorkel a wolverine (9/3/2008 11:08:27 PM)
HOW WELL IS THA WOLVERINE IN WATER AND MUD
Mudder_N_Hell -> RE: how to Snorkel a wolverine (9/3/2008 11:30:57 PM)
Mine is a pretty good mud and water machine. If I do get stuck, I just get off, pick it up and move it. Can't quite do that with the Grizzly's.
grizz450 -> RE: how to Snorkel a wolverine (9/4/2008 5:01:08 PM)
[:D]thats hoe my t wolf is
pineymudder -> RE: how to Snorkel a wolverine (9/6/2008 10:36:43 AM)
i did it way different than that. i sealed up the hole in the lid. then i got a 1 1/2 or 2 inch male adapter cut a hole into the box and twisted it in and sealed it, now you can take the lid off and not disturb your piping. it comes right out of the right hand side of the bike and goes right up the fender. its made from a suction hose from big ride on floor scrubber so i know it is rigid. i'll take some pics and post em up give me a minute.
pineymudder -> RE: how to Snorkel a wolverine (9/6/2008 11:53:36 AM)