RE: CV MaN Axles ****!!!!
Register     Acceptable Use Policy     FAQ     Search     Login :: Control Panel :: Log Out  
Our Gift to You! 1yr Paid Subscription to Quad Off Road!Our Gift to You! 1yr Paid Subscription to Quad Off Road!
[All Forums]     [Most Popular]     [HL Related]     [OEM]     [Swap Shop]     [Scott's Pics]     Chat Chat     Inbox PM Inbox  
Keyword Search Keyword Search
2003 Honda Rincon On Sale Now! Final HLPSR Race of the 08 Season
Logged in as: Guest

RE: CV MaN Axles ****!!!!

 
  Printable Version
View related threads: (in this forum | in all forums)

Users viewing this topic: none
All Forums >> [Most Popular Discussions] >> Tech Questions >> RE: CV MaN Axles ****!!!! Page: <<   < prev  1 2 [3] 4   next >   >>
Login
Message << Older Topic   Newer Topic >>
RE: CV MaN Axles ****!!!! - 8/31/2008 8:43:11 AM   
spltank

 

Posts: 598
Joined: 2/8/2008
Status: offline 		We bought New joints from cvman for my girls 04 650 AC and have had nothing but luck with them. Theres always going to be someone thats unhappy with a product no matter what.


It's consistancy that will build a brand. There's plenty of people on here who break or tear up this or that along with dozens of others with no problems from the same product.

This is just another case of that same situation.

Spend $160 and you get $160 worth of product. Dont buy a CV man axel for $160 and expect G axel performance which cost $350+. Then when you dont get the $350+ performance for your $160 you want to slam the mans prduct. Buy stock for $279 or G's for $350+ or quit complaning. You went the cheap way out, learned your lesson, and are now moving on. Done deal. (the you and your in this statement are generic to express a point and are not aimed at any member of this forum)




Neill

_____________________________

HIS:05 realtree BF--Dynatek--dynajet--LRD torq--epi springs--Uni--center snorkles--rad reloc--oil cooler--2" lift--29.5 laws--SS212's all rears--HL bumper and A arm guards.

HERS: 04 AC 650 red, snorkles, rad reloc, Dynatek , dynajet, HMF eco, epi springs, MSA troopers, 27" laws TRADE for Brute force


PM: "CUSTOM" for the Monster mods INC. hookup!!!!

(in reply to 450GrizzChase)
Post #: 61
RE: CV MaN Axles ****!!!! - 8/31/2008 8:48:09 AM   
450GrizzChase


Posts: 485
Joined: 10/27/2007
From: Gainesville, Ga
Status: offline 		Well said... spl




_____________________________

2007 Yamaha Grizzly 450
29.5 Swamp lites on the front (laws up front soon)
29.5 Outlaws on the rear
Black SS108s
HMF Jet Kit
Custom Baffle
Uni Filter
Lift
**** 3,000lb Winch (Crap), Viper 3000
Rear Winch coming soon
Clutch kit Different weights and springs.
Snorkeled head to toe
High Lifter springs
Comming soon....
Pipe
Skid Plates

Anyone in Georgia want to ride?

(in reply to spltank)
Post #: 62
RE: CV MaN Axles ****!!!! - 8/31/2008 8:58:18 AM   
iamthecvman


Posts: 14
Joined: 8/27/2008
Status: offline 		I'm sorry you feel that way. But I can assure you we have less than a 1% defect rate. If you have a lift be prepared to spend a lot of money on axles, period!


2007 Yamaha Grizzly 450
29.5 Swamp lites on the front (laws up front soon)
29.5 Outlaws on the rear
Douglas Rokstar rims
HMF Jet Kit
Custom Baffle
Uni Filter
Lift (Am I reading this right?
**** 3,000lb Winch (Crap)
Clutch kit Different weights and springs.
Snorkeled head to toe
High Lifter springs
Comming soon....
Pipe
Skid Plates

Rubicon_Joey
04 Red Honda Rubicon.....Mud Buster Cam...2'' lift...26x10 and 26x12 Outlaw Mst's...EPI Clutch Kit...MSA Tork Wheels...HMF Utility series...Dyno Jet Kit...K&N Air Filter...Warn: 3.0 ci, bumper and 424 select...Detriot Gearless Locker...H/L Disc Brakes

(in reply to 450GrizzChase)
Post #: 63
RE: CV MaN Axles ****!!!! - 8/31/2008 9:05:07 AM   
450GrizzChase


Posts: 485
Joined: 10/27/2007
From: Gainesville, Ga
Status: offline
Yes i am aware of what mods i have on my bike. Thanks for stating the obvious!

So why don`t in your product description put a disclaimer stating that if you have oversized tires or suspension modifications then this product will not be covered

this is what you state on ebay

"Customer service & return policy: Satisfaction guaranteed, we offer a 1 year warranty on all parts."

So what does this mean?

It says nothing about having any type of mods done to your bike.

< Message edited by 450GrizzChase -- 8/31/2008 9:27:42 AM >

_____________________________

2007 Yamaha Grizzly 450
29.5 Swamp lites on the front (laws up front soon)
29.5 Outlaws on the rear
Black SS108s
HMF Jet Kit
Custom Baffle
Uni Filter
Lift
**** 3,000lb Winch (Crap), Viper 3000
Rear Winch coming soon
Clutch kit Different weights and springs.
Snorkeled head to toe
High Lifter springs
Comming soon....
Pipe
Skid Plates

Anyone in Georgia want to ride?

(in reply to iamthecvman)
Post #: 64
RE: CV MaN Axles ****!!!! - 8/31/2008 9:15:39 AM   
450GrizzChase


Posts: 485
Joined: 10/27/2007
From: Gainesville, Ga
Status: offline 		This is an image of my cv angle with the BIG LIFT on it.

And here is one with no lift.




I don`t see much difference at all. Just cause a company calls it a 2in lift doesn`t mean you get a full 2inches. You can get up to 2inches but different applications vary.


Im gonna get off this forum to vent.



< Message edited by 450GrizzChase -- 8/31/2008 9:27:04 AM >

_____________________________

2007 Yamaha Grizzly 450
29.5 Swamp lites on the front (laws up front soon)
29.5 Outlaws on the rear
Black SS108s
HMF Jet Kit
Custom Baffle
Uni Filter
Lift
**** 3,000lb Winch (Crap), Viper 3000
Rear Winch coming soon
Clutch kit Different weights and springs.
Snorkeled head to toe
High Lifter springs
Comming soon....
Pipe
Skid Plates

Anyone in Georgia want to ride?

(in reply to 450GrizzChase)
Post #: 65
RE: CV MaN Axles ****!!!! - 8/31/2008 12:42:54 PM   
iamthecvman


Posts: 14
Joined: 8/27/2008
Status: offline 		Try removing the inner boot and then look how close you are to the rim of the inner cv joint when you jack the vehicle up off the ground. You have to allow for the full range of travel (not just when it sitting there parked in the driveway). As for the warranty look on your invoice. We also have it on our listings on Ebay. 

(in reply to 450GrizzChase)
Post #: 66
RE: CV MaN Axles ****!!!! - 8/31/2008 1:13:42 PM   
Solitude


Posts: 5075
Joined: 2/27/2006
From: Longview, Texas
Status: online
quote:

ORIGINAL: iamthecvman

If you have a lift be prepared to spend a lot of money on axles, period!



I dont!!

_____________________________

07 Yamaha Yellow Rhino 660 SE - 2" Lift with 27" Zillas on Chrome 112's
06 Suzuki King Quad 700 EFI - 8" SLC Lift with 29.5x10 Outlaws on Black Torks
02 Yamaha Grizzly 660 SE - 26" Mudlites on MSA Black Torks
94 Honda 300 - USA EDLS, Black ITP SS 212, 2" Lift, Progressive 512 Shocks, K&N, Custom Exhaust, DynoJet Kit, Snorked, Disk Brakes, HL Clutch Kit, Savant Floorboards

(in reply to iamthecvman)
Post #: 67
RE: CV MaN Axles ****!!!! - 8/31/2008 1:19:27 PM   
James Chapman


Posts: 1757
Joined: 2/28/2008
From: Spring TX **USA**
Status: offline 		You get what you pay for

Turner or Gor!lla next time maybe...

_____________________________

Support our Military and their mission

00 Dakota 4wd
BFG A/T's
Cherry Bomb

She's fast . She's real fast.

Past bike 08 brute

(in reply to Solitude)
Post #: 68
RE: CV MaN Axles ****!!!! - 8/31/2008 1:26:29 PM   
oldtrx


Posts: 2754
Joined: 6/18/2006
From: crossville illinois
Status: offline 		CVman axles are a joke.

they are useless and the worst piece fo crap i have ever owned.


how long till he is deleted for being a dealer?

_____________________________

-abunch of stuff i dont need

-http://www.youtube.com/user/oldtrx2

-www.gaorc.com

-www.myspace.com/haro_bikes_91

quote:

ORIGINAL: ydopen
He would just look at them and smile and say a Toyota can do anything.


quote:

ORIGINAL: ubba Aldridge

If you can't fix it with a hammer, you've got an electrical problem.

(in reply to James Chapman)
Post #: 69
RE: CV MaN Axles ****!!!! - 8/31/2008 1:34:06 PM   
oldtrx


Posts: 2754
Joined: 6/18/2006
From: crossville illinois
Status: offline 		this was NO LIFT NO SPRING SPACERS AND WORN OUT SHOCKS FROM 1994




_____________________________

-abunch of stuff i dont need

-http://www.youtube.com/user/oldtrx2

-www.gaorc.com

-www.myspace.com/haro_bikes_91

quote:

ORIGINAL: ydopen
He would just look at them and smile and say a Toyota can do anything.


quote:

ORIGINAL: ubba Aldridge

If you can't fix it with a hammer, you've got an electrical problem.

(in reply to oldtrx)
Post #: 70
RE: CV MaN Axles ****!!!! - 8/31/2008 1:41:10 PM   
oldtrx


Posts: 2754
Joined: 6/18/2006
From: crossville illinois
Status: offline
quote:

ORIGINAL: iamthecvman

b) When the a-arm drops down (i.e. while the bike leaves the ground). The inner cage is cocked at a very steep angle. Then when hit the ground with a hard force the ball, cage and race need to slide back into the inner cv joint cup. However, with the cage (the part that has 6 windows that the balls ride in) is at this extreme angle it will cause the joint to bind. Then when the shaft comes in it's equivalent to breaking a twig over your knee. 




so if you hit a bump on the trail, ramp a tree, pop a wheelie or do anything where the wheels come off the ground you dont gaurantee them to be able to withstand it?  

_____________________________

-abunch of stuff i dont need

-http://www.youtube.com/user/oldtrx2

-www.gaorc.com

-www.myspace.com/haro_bikes_91

quote:

ORIGINAL: ydopen
He would just look at them and smile and say a Toyota can do anything.


quote:

ORIGINAL: ubba Aldridge

If you can't fix it with a hammer, you've got an electrical problem.

(in reply to iamthecvman)
Post #: 71
RE: CV MaN Axles ****!!!! - 8/31/2008 1:43:41 PM   
450GrizzChase


Posts: 485
Joined: 10/27/2007
From: Gainesville, Ga
Status: offline 		Danny are you gonna send me some more clamps for doing this to prove a point to you? Well honestly after i think about it. I don`t really feel its even worth the time and effort.

I`m done!

_____________________________

2007 Yamaha Grizzly 450
29.5 Swamp lites on the front (laws up front soon)
29.5 Outlaws on the rear
Black SS108s
HMF Jet Kit
Custom Baffle
Uni Filter
Lift
**** 3,000lb Winch (Crap), Viper 3000
Rear Winch coming soon
Clutch kit Different weights and springs.
Snorkeled head to toe
High Lifter springs
Comming soon....
Pipe
Skid Plates

Anyone in Georgia want to ride?

(in reply to iamthecvman)
Post #: 72
RE: CV MaN Axles ****!!!! - 8/31/2008 1:59:07 PM   
ShawtShank


Posts: 234
Joined: 4/17/2008
Status: offline 		I cant beleive I was actually about to consider buying some of these axles from this guy! HA what a joke, Ima leave it at that.

(in reply to 450GrizzChase)
Post #: 73
RE: CV MaN Axles ****!!!! - 8/31/2008 3:06:21 PM   
Xplorer470

 

Posts: 161
Joined: 7/9/2008
From: Lexington, SC
Status: offline 		ooh man chase, sorry to hear about that.. don't forget though i did try to warn you!

_____________________________

96 Xplorer 400.AAEN 470 bbk,44mm carb,14:1 compression,aluminum head,roller clutch,6"lift.31"laws, axle paddles.80-85 hp at the fly =)

03 sp 700.800 bbk,6"lift,32" sbacks,stage 3 motor work,gear reduction,pinned crank,cam,42mm carb, 12:1 pistons

(in reply to ShawtShank)
Post #: 74
RE: CV MaN Axles ****!!!! - 8/31/2008 3:41:19 PM   
iamthecvman


Posts: 14
Joined: 8/27/2008
Status: offline 		Of course these will with stand normal use. However, as I have been trying tell everyone (not on lifted vehicles). Read my post to understand why. And Xplorer470 I'm glad you decided against these with a 6" lift on your bike I'm sure I would have been dealing with more undeserved bashing. I have always dealt with everyone honestly, but as you can see by some of these post I get a few  dishonest people blowing smoke up my gazoo about the mods on their bikes. I have never said these where an option for lifted vehicles. Even though I have seen several post to the contrary. I'm working on axles for that purpose but anytime any one tells me that there vehicle is lifted we recommend "G" axles. We're not going to ruin our good reputation to try and make 1 sale. I would suggest "if in doubt check us out". But perhaps on other forums that aren't devoted to jacked up vehicles. 

(in reply to Xplorer470)
Post #: 75
RE: CV MaN Axles ****!!!! - 8/31/2008 3:59:39 PM   
James Chapman


Posts: 1757
Joined: 2/28/2008
From: Spring TX **USA**
Status: offline 		Why did oldtrx have a broken axle with no lift?.... The pictures are right there

_____________________________

Support our Military and their mission

00 Dakota 4wd
BFG A/T's
Cherry Bomb

She's fast . She's real fast.

Past bike 08 brute

(in reply to iamthecvman)
Post #: 76
RE: CV MaN Axles ****!!!! - 8/31/2008 4:16:05 PM   
iamthecvman


Posts: 14
Joined: 8/27/2008
Status: offline 		I can't say for certain without seeing the parts first hand. But I will say that it looks to me like the boot clamps were leaking ((Most people struggle with these) or he had a torn boot. And based on the rust, heat marks and the condition of the balls this would be my bet. Also I  have no way of knowing the condition of the ball tracks inside the housing. If these parts had been kept properly greased they'd still be shinny since the ball bearings are chromed. Looks pretty dirty to me. And this is not typically going to look this bad just trying to limp it back to camp.

< Message edited by iamthecvman -- 8/31/2008 4:18:46 PM >

(in reply to James Chapman)
Post #: 77
RE: CV MaN Axles ****!!!! - 8/31/2008 6:56:32 PM   
oldtrx


Posts: 2754
Joined: 6/18/2006
From: crossville illinois
Status: offline
quote:

ORIGINAL: iamthecvman

I can't say for certain without seeing the parts first hand. But I will say that it looks to me like the boot clamps were leaking ((Most people struggle with these) or he had a torn boot. And based on the rust, heat marks and the condition of the balls this would be my bet. Also I  have no way of knowing the condition of the ball tracks inside the housing. If these parts had been kept properly greased they'd still be shinny since the ball bearings are chromed. Looks pretty dirty to me. And this is not typically going to look this bad just trying to limp it back to camp.


that was a pic i took a few weeks ago after replacing my axle with a factory honda. they had been sittin on my porch for awhile in the weather.


if the boot clamps were leaking or there was not enough grease then that is a defect on YOUR fault seeing as the fact that this was an OUTER cv.

also there weas no hole in the boot, i kept it as a spare and last weekend i put it on after i had a tree gouge an inner on the other side, no leaks no either.

_____________________________

-abunch of stuff i dont need

-http://www.youtube.com/user/oldtrx2

-www.gaorc.com

-www.myspace.com/haro_bikes_91

quote:

ORIGINAL: ydopen
He would just look at them and smile and say a Toyota can do anything.


quote:

ORIGINAL: ubba Aldridge

If you can't fix it with a hammer, you've got an electrical problem.

(in reply to iamthecvman)
Post #: 78
RE: CV MaN Axles ****!!!! - 8/31/2008 7:03:36 PM   
oldtrx


Posts: 2754
Joined: 6/18/2006
From: crossville illinois
Status: offline 		i will say this, you have very tough cv boots.

_____________________________

-abunch of stuff i dont need

-http://www.youtube.com/user/oldtrx2

-www.gaorc.com

-www.myspace.com/haro_bikes_91

quote:

ORIGINAL: ydopen
He would just look at them and smile and say a Toyota can do anything.


quote:

ORIGINAL: ubba Aldridge

If you can't fix it with a hammer, you've got an electrical problem.

(in reply to oldtrx)
Post #: 79
RE: CV MaN Axles ****!!!! - 8/31/2008 7:40:08 PM   
badbehavior


Posts: 144
Joined: 6/10/2008
From: Quitman, Ms
Status: offline 		Well, the last axle I got from the cv man held up all day yesterday at Wilborn's. Mud, hills, rocks, and regular trails. I was so relieved, and sruprised when I loaded it on the trailer, and had all 4 wheels still pulling. I even had to mash on the go pedal pretty hard in 2wd to get up some of the hills. I am not changing my opinion of these axles, yet. It's gonna have to hold up to alot more than 1 hard day of riding. I just thought I would give an update on my latest experience with the "heavy duty" axles.

_____________________________

2004 Rhino 660 - modded
2006 Ram 2500 Mega Cab Cummins - modded
1983 Chevy Blazer on 38" Swampers - modded

quote:

Scooped_Kawasaki

Quick, go get yourself clipped and take yourself out of the gene pool.

(in reply to oldtrx)
Post #: 80
RE: CV MaN Axles ****!!!! - 8/31/2008 10:00:55 PM   
toyazman76


Posts: 325
Joined: 2/12/2007
From: Port ST. Lucie Fl.
Status: offline 		Just to throw in my two cents, I broke one of his axle's a couple weeks ago, sent him the invoice of 16 months ago and called him. He said it was not under warranty but if I send him the complete CV he would put another shaft on for 40 bucks. Really he COULD have said out of warrant go pack sand but he didn't. I just hope he up- grades his axles to be as strong as the monkey ones at a lower price. 375.00 is highway robbery for one axle.. I know what everyone is going to say "you have to pay to play" but come on this is crazy.JMO.

_____________________________

2003 Grizzly 660, Snorkeled, Mudbuster cam, Wiseco piston, DIY split audio Tube, 27" laws, EPI clutch Kit, Relocated radiator, Temp-gauge, Custom cooler rack.
1992 Banshee-SOLD

(in reply to badbehavior)
Post #: 81
RE: CV MaN Axles ****!!!! - 9/1/2008 12:22:22 AM   
Solitude


Posts: 5075
Joined: 2/27/2006
From: Longview, Texas
Status: online 		Man dont feel to bad about your axles.. I saw a Gorilllla Axle break this weekend just riding around the camp ground going to the mud. It was on a worn down 2" lifted bike so well give it that but come on, dry flat ground putting around? Yall should team up!! 

_____________________________

07 Yamaha Yellow Rhino 660 SE - 2" Lift with 27" Zillas on Chrome 112's
06 Suzuki King Quad 700 EFI - 8" SLC Lift with 29.5x10 Outlaws on Black Torks
02 Yamaha Grizzly 660 SE - 26" Mudlites on MSA Black Torks
94 Honda 300 - USA EDLS, Black ITP SS 212, 2" Lift, Progressive 512 Shocks, K&N, Custom Exhaust, DynoJet Kit, Snorked, Disk Brakes, HL Clutch Kit, Savant Floorboards

(in reply to toyazman76)
Post #: 82
RE: CV MaN Axles ****!!!! - 9/1/2008 12:29:05 AM   
James Chapman


Posts: 1757
Joined: 2/28/2008
From: Spring TX **USA**
Status: offline
quote:

Yall should team up!! 


ROFLMFAO!!!

TURNER AXLE OR NO AXLE!!!

_____________________________

Support our Military and their mission

00 Dakota 4wd
BFG A/T's
Cherry Bomb

She's fast . She's real fast.

Past bike 08 brute

(in reply to Solitude)
Post #: 83
RE: CV MaN Axles ****!!!! - 9/1/2008 12:31:00 AM   
Guest
quote:

ORIGINAL: Solitude

Man dont feel to bad about your axles.. I saw a Gorilllla Axle break this weekend just riding around the camp ground going to the mud. It was on a worn down 2" lifted bike so well give it that but come on, dry flat ground putting around? Yall should team up!! 


lol..

(in reply to Solitude)
  Post #: 84
RE: CV MaN Axles ****!!!! - 9/1/2008 12:42:14 AM   
Jordan Petry


Posts: 2820
Joined: 10/5/2007
From: Lawrence, Kansas
Status: offline
quote:

ORIGINAL: GWC

So has anyone bought his axles and still useing them..???  sounds like they break very fast.


I had one on the front right side of my 300 and it held up for a good 1000 miles w/ no problems...  I was running 26" mudbugs and I have a very light right thumb.  One thing I really liked about his axles was that the boots seemed very thick and durable...  I would probably buy from him again if it was the other axle that broke seeing how cheap they are and how well my right axle has held up.  Jm .02

_____________________________



-1991 Honda 300 - SOLD
-1999 Toyota 4Runner 4x4

(in reply to GWC)
Post #: 85
RE: CV MaN Axles ****!!!! - 9/1/2008 7:58:21 AM   
iamthecvman


Posts: 14
Joined: 8/27/2008
Status: offline 		Hey Jordan,
Thanks for your support. I hope that more of my thousands of satisfied customers will chime in on my behalf.
Thanks,
Danny

(in reply to Jordan Petry)
Post #: 86
RE: CV MaN Axles ****!!!! - 9/1/2008 8:29:56 AM   
mud_dog450


Posts: 5554
Joined: 6/20/2004
From: Northeastern Indiana
Status: online 		Danny, a few words of advice from a mechanic and warranty technician.

Explain your warranty terms better.  When I purchased that CV rebuilt kit from you, installed it, broke it, then tried to warranty it with no luck, I was a little upset considering your warranty statement. 

The e-mail you sent back stating that rebuilt kits were NOT covered under warranty was what caught me off guard.  Nowhere did I read anything stating that before I heard it from you.  It makes perfect sense to me why they are not covered, but the fact that the words all parts is included in your warranty statement doesn't seem right.  Someone who doesn't understand the technical side of why you wouldn't cover the rebuild kit could stir up tons of trouble for you. 

I'm not bashing you in any way, I'm just trying to offer some feedback on our end of the deal.

I won't use your products again given the issues I've had with them on my non-lifted bike.  But that's just me.

_____________________________

Check out our UPDATED Acceptable Use Policy, here!


The Mud Brothers
Goin' Deep Since 2004!
02 Grizz
Everything Snorkeled
Clutch Work
29.5 Laws on Vision Buckshots

Wet Nitrous and custom EFI conversion in the works...

Muddin Videos

(in reply to iamthecvman)
Post #: 87
RE: CV MaN Axles ****!!!! - 9/1/2008 11:05:34 AM   
J_Fred


Posts: 2949
Joined: 6/1/2007
From: Meeks, GA
Status: online 		I don't see why people a helping CV man out... if something is marketed as HEAVY DUTY, and it can't hold up to factory specs, who is in the wrong here?  People who expect heavy duty axles?  Doesn't make since.

CVMan, armortech, american CV... all **** axles and cv's, don't waste your money.  Factory axles hold up better, and **** and turner are the best.

< Message edited by mud_dog450 -- 9/1/2008 7:39:05 PM >

_____________________________

"I don't get stuck, I just lose traction and stop moving."
----------
2001 Polaris 500 H.O.
K&N, 27x12 Vamp rear /American EDL fronts
----------
Gone -- AC 500m
28x12 Mudzillas, Snorked, G*rillas all around
----------
SOLD
2001 Honda Rubicon - Lift, 27x12 Vamps, snorkels, the works.
----------
www.myspace.com/joshfrederick

(in reply to mud_dog450)
Post #: 88
RE: CV MaN Axles ****!!!! - 9/1/2008 12:19:10 PM   
James Chapman


Posts: 1757
Joined: 2/28/2008
From: Spring TX **USA**
Status: offline
quote:

ORIGINAL: J_Fred

I don't see why people a helping CV man out... if something is marketed as HEAVY DUTY, and it can't hold up to factory specs, who is in the wrong here?  People who expect heavy duty axles?  Doesn't make since.

CVMan, armortech, american CV... all **** axles and cv's, don't waste your money.  Factory axles hold up better, and **** and turner are the best.


Well Said.

< Message edited by mud_dog450 -- 9/1/2008 7:39:36 PM >

_____________________________

Support our Military and their mission

00 Dakota 4wd
BFG A/T's
Cherry Bomb

She's fast . She's real fast.

Past bike 08 brute

(in reply to J_Fred)
Post #: 89
RE: CV MaN Axles ****!!!! - 9/1/2008 3:30:01 PM   
Jordan Petry


Posts: 2820
Joined: 10/5/2007
From: Lawrence, Kansas
Status: offline
quot