2002-03 grizzly's & Question

2002-03 grizzly's & Question (Full Version)

All Forums >> [OEM Discussions] >> Yamaha



Message

boutilier102004 -> 2002-03 grizzly's & Question (7/24/2008 8:26:58 PM)

We'll as some of you may know i recently about 5 months ago bought a 2003 grizzly so now i have a 2002 & a 2003  i havent posted pictures cause had to send my camera away to get fixed: ( so here is some pictures..   oh and i also have a question i have my 2002 grizzly fully snorkeld and it seems to run like edited, NO creative spelling!!!!! like it bog's with just lil 26'' mudlites on it and i have a bbk  and exhasut as u can see in my sig please help  me with this so i can gett out and Really test out these snorkels and the bbk ! thanks in advance !!


[image]http://i275.photobucket.com/albums/jj288/boutilier102004/2002%20Grizzly%20660/2003%20grizzly%20660/Rogers017.jpg[/image][image]http://i275.photobucket.com/albums/jj288/boutilier102004/2002%20Grizzly%20660/2003%20grizzly%20660/BikePics010-1.jpg[/image]



mud_dog450 -> RE: 2002-03 grizzly's & Question (7/24/2008 8:37:53 PM)

First off, you should get rid of your creative spelling.  No need for it.

Secondly, how did you snorkel the airbox?  Did you run a pipe between the seat and the tank?  Or did you run hose to your front rack?  Reason it is bogging down is most likely due to the fact that you restricted air with the snorkels you installed.  This will cause it to run rich and run like you have described.

Next, you need to figure out which carburetor circuits are running poorly and adjust them accordingly.  In this case, that will mean going down in jet sizes or raising the clip on the needle.

My advice is to troubleshoot and fix each circuit, one at a time.  Idle, Accelerator Pump, Mid, and Main circuits.



boutilier102004 -> RE: 2002-03 grizzly's & Question (7/24/2008 8:51:10 PM)

Yeah sorry about that just so darn Frusterated with this thing!! 

It' it snorkeled right up to the front rack 2 2'' pipes and i don't have many angles in the snorkle to cause it not to get much air.


[img]http://i275.photobucket.com/albums/jj288/boutilier102004/2002%20Grizzly%20660/2003%20grizzly%20660/Rogers015.jpg[/img]



BB07 -> RE: 2002-03 grizzly's & Question (7/24/2008 11:12:07 PM)

Did you change jets when you snorkeled it. (2) 2" intakes and a bbk that thing should turn the tires without a problem.



bighusk660 -> RE: 2002-03 grizzly's & Question (7/25/2008 12:33:34 AM)

Dude you have way to much air going into the bike, you def need to jet it out. First your bike is naturally supposed to have a single 2 inch intake, now that you doubled that and added a exhaust, you will need to run anywhere from a 160 to a 170 dyno jet. This was the worst mod (in terms of installation) i did to my bike. The only way to do it correctly is to put a jet in run the bike, pull the plug, adjust accordingly and then repeat. Gl, once you ahve it figured out, she will run like a top. If you have any questions then check out our website.

Mike



Page: [1]



Forum Software © ASPPlayground.NET Advanced Edition 2.5.5 Unicode

0.234