|
LiveForMud -> RE: 05 FOREMAN 2WD INTO 4WD? (7/25/2008 11:21:01 AM)
|
my dad just got rid of a green 05 500S 2wd for a green 06 500S 4wd earlier this year. you could see the front shaft boss capped off on the front left side of the engine, so the internal shaft should be there once you pull the cap out and get a yoke to hook to it. i didn't look to see if all the tabs were welded in the front to hold the differential though. as long as the tabs are there you shouldn't need anything more than the shaft, axles, differential, and switch/wiring. you might need the hubs and brakes too, as i'm not sure if honda made those specific to the 2wd or 4wd versions.
|
|
|
|