Arctic Cat Tips and Helpful Information...

Arctic Cat Tips and Helpful Information... (Full Version)

All Forums >> [OEM Discussions] >> Arctic Cat



Message

GWC -> Arctic Cat Tips and Helpful Information... (1/6/2008 12:42:41 PM)

Universal Arctic Cat Tips:







     http://www.highlifter.com/forum/Where_to_buy_CV_Boots%3f/m_2589457/tm.htm   Geo Metro Boot part #s

Transmission-Related:

Fuel-Injection Related:



General Info:



  • Reverse Override Limiter Removal:

  1. for the 650H1
  2. for the 700EFI



engie -> RE: Links to helpfull Arctic Cat tips (2/17/2008 7:28:23 PM)

Guys, as you come across a thread that needs to be added here, please either pm us or post in this thread.  Ideally, we can eventually do away with alot of the repetitive questions by making the answers easier to find...



squeak12 -> RE: Links to helpfull Arctic Cat tips (5/5/2008 9:59:43 PM)

That would be nice.

How about some common part #s, such as the new differential seals, etc.



engie -> RE: Links to helpfull Arctic Cat tips (5/21/2008 11:00:36 AM)

It's against HL's rules to "host" the service manuals or the links to them.  We already had a link in this thread to ALL the AC repair manuals, and I had to remove it.  It's nice to know where to find the repair manuals, and I invite those of you to check out arcticchat for a method to find them.  However, HL wishes to keep "free" copyrighted material off their website for the obvious "possible" legal issues that could arise.  Thanks.  



HoldMyBeer69 -> RE: Arctic Cat Tips and Helpful Information... (8/6/2008 8:56:39 PM)

Maybe I missed it or maybe I do need to do it.

How do you override the rev limiter in low and is it recommended.

I know GWC has the answer.

By the way, doin' the reverse override this weekend.  Thanks for the info



GWC -> RE: Arctic Cat Tips and Helpful Information... (8/6/2008 9:12:47 PM)

dont want to do that, its hitting its max rpm in low and if you take it off you could over rev it and blow the motor up.



HoldMyBeer69 -> RE: Arctic Cat Tips and Helpful Information... (8/7/2008 6:51:23 PM)

Thanks..Knew you would have the answer



engie -> RE: Arctic Cat Tips and Helpful Information... (8/18/2008 5:04:48 PM)

You could probably find one of the ignition boxes to increase RPMs 500-1000 without any ill effects.  My bike was running an 8200 rpm rev limit at one time, and I was constantly on the revlimiter in water races with no ill-effects during those races.  However, my motor wasn't exactly stock.  You need some real good valve springs and a forged piston/connecting rod if you intend to go over 7500rpms on that motor...



outdrsmn82 -> RE: Arctic Cat Tips and Helpful Information... (8/20/2008 11:23:16 AM)

how about putting a link to downloadable service manuals. i got one off of here and i am trying to hook someone else up with it and for the life of me i cant find where i got it in what thread i know it was ac but its been months.



engie -> RE: Arctic Cat Tips and Helpful Information... (8/27/2008 10:12:08 AM)

quote:

ORIGINAL: outdrsmn82

how about putting a link to downloadable service manuals. i got one off of here and i am trying to hook someone else up with it and for the life of me i cant find where i got it in what thread i know it was ac but its been months.


Copied this from my earlier post in this thread:

quote:

It's against HL's rules to "host" the service manuals or the links to them.  We already had a link in this thread to ALL the AC repair manuals, and I had to remove it.  It's nice to know where to find the repair manuals, and I invite those of you to check out arcticchat for a method to find them.  However, HL wishes to keep "free" copyrighted material off their website for the obvious "possible" legal issues that could arise.  Thanks.  


I threw a bone in that reply with a method to find them, but we will NOT be hosting them here.



LiveForMud -> RE: Arctic Cat Tips and Helpful Information... (10/31/2008 5:01:55 PM)

got a suggestion... the 400m reverse fix that i've been pushing for a while has finally been proven to work, and the latest thread is this one:

http://www.highlifter.com/forum/400m_reverse_fix_has_begun%25%25%25/m_2941926/tm.htm

when the guy i'm working with gets back we'll do the mod and get a lot of pics and vids... and i'll be adding them to that thread.



Page: [1]



Forum Software © ASPPlayground.NET Advanced Edition 2.5.5 Unicode

1.063