Trapper
Posts: 10208
Joined: 1/23/2002
From: MS
Status: offline
|
Minjin,
I don't like the handling without it on...so I'm certainly putting
it back on for now. I'm just replacing the crappy rubber bushings
with some poly ones. Beyond that, I'm still mulling over the Durablue
bar. Still not sold on that yet though....
As for the replacements I'm using, they are made by Energy Suspension
and sold through Summit (and probably elsewhere) for about $14 a pair.
They should be in either tomorrow or the next day. I'm anxious to see
if the fitment is correct. If it is, I'll PM you the part number. I'm
going to post pics here when they come in. If you want to go ahead
and see what they look like, the part number is ENS-9-5156R. Total
damage with shipping was about $23.
They are the 19mm/3/4 inch version. I've seen a couple of people
around the forums order some in 22mm/7/8 sizes, but my measurements
showed 19mm. So I'm going with that. As I said, I'll let you know if
the holes line up and everything looks good. ANYTHING has to be
better than the sloppiness the rubber stockers have. Have you looked
at your bar ends where the "linkage" connects to the A-arms? Some
people have seen breakage on these, but mine still look good. This was
another reason I was looking at the Durablue bar.
quote:
Yea nice pics, but what was the point of this? Are you taking it off, or were you missing something, or was it just to show people the parts?
The reason was two-fold. Someone had asked for pics and I also
wanted to show the befores and afters of replacing the stock bushings.
BTW, no harm...I know there was no sarcasm intended. I was going to
post the reason for the thread when I put the pics up, but I had
to step away from the computer.
< Message edited by trapper -- 3/8/2006 10:19:26 PM >
_____________________________
Warning: Low Idiot Tolerance
|
Inbox 
Printable Version
Swaybar Pics - 
I thought maybe there was a reply somewhere I kept missing lol was wondering how we went from 
