Snorkeling my 680 rincon
Register     Acceptable Use Policy     FAQ     Search     Login :: Control Panel :: Log Out  
High Lifter
[All Forums]     [Most Popular]     [HL Related]     [OEM]     [Swap Shop]     [Scott's Pics]     Chat Chat     Inbox PM Inbox  
Keyword Search Keyword Search
2003 Honda Rincon On Sale Now! December 8th Second Chance Cyber Monday Sale!
Logged in as: Guest

Snorkeling my 680 rincon

 
  Printable Version
View related threads: (in this forum | in all forums)

Users viewing this topic: none
All Forums >> [OEM Discussions] >> Honda >> Snorkeling my 680 rincon Page: [1] 2   next >   >>
Login
Message << Older Topic   Newer Topic >>
Snorkeling my 680 rincon - 8/23/2008 6:25:36 AM   
Brian May


Posts: 15
Joined: 7/30/2008
From: Apple Springs, TEXAS
Status: offline 		I'm trying to find a snorkel kit for my 08 rincon but can't.  I called some places and they want to charge me $300 coustom build and install.  Is that about right?  I would try myself but i'm clueless about trying to build snorkels.

_____________________________

2008 Rincon
27" Mudzillas
Stealth Snorkel
Post #: 1
RE: Snorkeling my 680 rincon - 8/23/2008 8:41:00 AM   
dcfox


Posts: 724
Joined: 4/15/2008
From: Beaumont,Texas
Status: offline 		It's not hard at all...and should cost you about 450 in parts.
Here's a link to pics of mine...

http://smg.photobucket.com/albums/v84/dcfox/Rincon/Snorkle/

_____________________________

--David
Add me on Myspace

(in reply to Brian May)
Post #: 2
RE: Snorkeling my 680 rincon - 8/23/2008 10:11:15 AM   
Unstuckable


Posts: 89
Joined: 4/11/2008
Status: offline 		$450 to snorkel a Rincon? More like $50 at home depot. Dont forget about your front and rear differential vent lines as well as the crank vent line. You can pick up the same type of hose Honda uses at Home Depot for about $10 for over 50 ft.

< Message edited by Unstuckable -- 8/23/2008 10:13:07 AM >

_____________________________

Vero Beach, Florida

2007 Honda Rincon on 26" Vamps

(in reply to dcfox)
Post #: 3
RE: Snorkeling my 680 rincon - 8/23/2008 10:39:43 AM   
B.W.L 500


Posts: 2019
Joined: 5/22/2007
From: Breaux Bridge,LA
Status: offline
quote:

ORIGINAL: dcfox

It's not hard at all...and should cost you about 450 in parts.
Here's a link to pics of mine...

http://smg.photobucket.com/albums/v84/dcfox/Rincon/Snorkle/


Hopefully he meant 4.50!!!Itll cost about 200-300 IF you want to buy a snorkel designed for your bike,BUT they wont install.It will cost you 5.00-50.00 to buy all the nessasary pipe and other things needed to CUSTOM design one for your bike.Ask around on highlifter,someone may be able to help you out......

_____________________________

Brian
03 Chevy Silverado 1500

06 4man 500
ALOT of add ons




http://www.myspace.com/honda500rider

Lets ride

(in reply to dcfox)
Post #: 4
RE: Snorkeling my 680 rincon - 8/23/2008 10:43:38 AM   
#1rubicon


Posts: 1327
Joined: 1/26/2008
From: hogansville, GA
Status: offline 		he meant $45.00, cause thats exactly what it cost me to build mine.

_____________________________

GOT JESUS?
http://community.webshots.com/user/rinconmudder

03 honda rincon

27'' Silver backs
itp ss112's
2'' lift
HMF utility
clipped carb spring
custom center snorkel
HMF jet kit
(ITP)
Gorilla Axle
||||||||||||

GO RILLA OR GO HOME!

(in reply to B.W.L 500)
Post #: 5
RE: Snorkeling my 680 rincon - 8/23/2008 1:09:09 PM   
Brian May


Posts: 15
Joined: 7/30/2008
From: Apple Springs, TEXAS
Status: offline 		What is the best size 1 1/2" or 2"?

_____________________________

2008 Rincon
27" Mudzillas
Stealth Snorkel

(in reply to #1rubicon)
Post #: 6
RE: Snorkeling my 680 rincon - 8/23/2008 1:51:19 PM   
B.W.L 500


Posts: 2019
Joined: 5/22/2007
From: Breaux Bridge,LA
Status: offline 		it all depends on what your planning on doing.You will MOST likely have to run 2",because Ranchers run off 1 1/2 stock.If you put a pipe and programmer you will need 2" for sure....

_____________________________

Brian
03 Chevy Silverado 1500

06 4man 500
ALOT of add ons




http://www.myspace.com/honda500rider

Lets ride

(in reply to Brian May)
Post #: 7
RE: Snorkeling my 680 rincon - 8/23/2008 2:01:41 PM   
#1rubicon


Posts: 1327
Joined: 1/26/2008
From: hogansville, GA
Status: offline 		2'', because 1 1.5'' is too restirictive.

_____________________________

GOT JESUS?
http://community.webshots.com/user/rinconmudder

03 honda rincon

27'' Silver backs
itp ss112's
2'' lift
HMF utility
clipped carb spring
custom center snorkel
HMF jet kit
(ITP)
Gorilla Axle
||||||||||||

GO RILLA OR GO HOME!

(in reply to B.W.L 500)
Post #: 8
RE: Snorkeling my 680 rincon - 8/23/2008 3:20:23 PM   
Disturbed Society


Posts: 331
Joined: 12/15/2007
From: Brandenburg, Ky.
Status: offline 		I ran 1.5 inch on mine and it runs great.  If you go with 2" without a fi controller, your bike won't run right.

Cost around $30.00 to do mine, but I did a stealth one.

_____________________________

2006 Honda Rincon (Camo), 25 inch Maxxis Bighorns For The Trails (Full of slime), 27 inch Outlaws on Black ITP SS 108's For The Mud,FMF Powerline Exhaust, UNI Filter, Dynatek FI Controller, Kimpex Front Bumper, ATV-GURU.com Rear Bumper, ATV-GURU.com 2in Rear Hitch Reciever, Powermadd Handguards, Death Grips, Warn XT 30 with Amsteel Blue Line, AP Skid Plate Package, Radiator Spacers, Vent Lines Re-routed, Stealth Snorkel


My Videos: http://www.youtube.com/user/lovec

(in reply to #1rubicon)
Post #: 9
RE: Snorkeling my 680 rincon - 8/24/2008 7:56:51 AM   
hightechredneck


Posts: 1540
Joined: 9/6/2006
From: south florida
Status: offline 		i did my just like his ^^^^ .cost me under 30 dollars and very simple .i can e-mail you pics that he gave me hepled me out alot its step by step how to do it.

_____________________________

40/17/R16.5 GROUND HAWGS
-FOR SALE $80PM ME^^^^


07 Honda Rincon 680 Camo
-Custom Snorkel








06 Ford 350 Long Bed 4x4
-2inch Level Lift
-35inch Toyo M/T
-4inch Turbo Back Exhaust W/5Inch Tip
-Bully Dog Programmer

(in reply to Disturbed Society)
Post #: 10
RE: Snorkeling my 680 rincon - 8/24/2008 9:39:42 AM   
mac102004


Posts: 7019
Joined: 11/5/2005
From: Nova Scotia
Status: online 		Actually he meant $50. He just forgot to hit shift, 4 = $. I reccomend a stealth snorkel, its high enough and all you need is a $20 2.5" shop vac hose.

_____________________________

2009 Yamaha Rhino 700FI SE Deluxe
2001 Honda 350 4x4

http://community.webshots.com/user/mac102004

(in reply to hightechredneck)
Post #: 11
RE: Snorkeling my 680 rincon - 8/24/2008 12:48:18 PM   
dcfox


Posts: 724
Joined: 4/15/2008
From: Beaumont,Texas
Status: offline 		Sorry...my typing mistake...yes...I missed the shift key.
I meant $50.

Mac is right...the stealth snorkel is the least expensive,and easiest way to go.
It's also more than adequate for 95% of the people out there.
If I ever replace my plastic...I'll be changing my snorkel to a stealth snorkel.

_____________________________

--David
Add me on Myspace

(in reply to mac102004)
Post #: 12
RE: Snorkeling my 680 rincon - 8/24/2008 1:21:20 PM   
hightechredneck


Posts: 1540
Joined: 9/6/2006
From: south florida
Status: offline 		$30 STEALTH SNORKEL.





_____________________________

40/17/R16.5 GROUND HAWGS
-FOR SALE $80PM ME^^^^


07 Honda Rincon 680 Camo
-Custom Snorkel








06 Ford 350 Long Bed 4x4
-2inch Level Lift
-35inch Toyo M/T
-4inch Turbo Back Exhaust W/5Inch Tip
-Bully Dog Programmer

(in reply to dcfox)
Post #: 13
RE: Snorkeling my 680 rincon - 8/24/2008 1:34:51 PM   
dcfox


Posts: 724
Joined: 4/15/2008
From: Beaumont,Texas
Status: offline 		There ya go.
Should be about a 30 minute job and you're ready to go.
Well...maybe another 30 minutes or so to extend the vent lines up.

_____________________________

--David
Add me on Myspace

(in reply to hightechredneck)
Post #: 14
RE: Snorkeling my 680 rincon - 8/24/2008 2:36:44 PM   
hightechredneck


Posts: 1540
Joined: 9/6/2006
From: south florida
Status: offline 		took me about 45mins the silcone didnt want to go on easy . i will be testing it this weekend should have some good pics .

brain may - deleted your e-mail if you need a parts list or anything else be more than happy to help out.

_____________________________

40/17/R16.5 GROUND HAWGS
-FOR SALE $80PM ME^^^^


07 Honda Rincon 680 Camo
-Custom Snorkel








06 Ford 350 Long Bed 4x4
-2inch Level Lift
-35inch Toyo M/T
-4inch Turbo Back Exhaust W/5Inch Tip
-Bully Dog Programmer

(in reply to dcfox)
Post #: 15
RE: Snorkeling my 680 rincon - 8/24/2008 4:54:32 PM   
Brian May


Posts: 15
Joined: 7/30/2008
From: Apple Springs, TEXAS
Status: offline 		ok that looks good where do i find the vent lines that i need to extend at?

_____________________________

2008 Rincon
27" Mudzillas
Stealth Snorkel

(in reply to hightechredneck)
Post #: 16
RE: Snorkeling my 680 rincon - 8/24/2008 7:15:23 PM   
dcfox


Posts: 724
Joined: 4/15/2008
From: Beaumont,Texas
Status: offline 		Do you need to know where to buy the tubing to use to extend them?
I got mine at Lowes.
I got 1/4" tubing for everything but the water pump.It takes 3/8" tubing.

_____________________________

--David
Add me on Myspace

(in reply to Brian May)
Post #: 17
RE: Snorkeling my 680 rincon - 8/24/2008 7:24:52 PM   
marvin1313


Posts: 178
Joined: 7/28/2007
From: Brandenburg, Ky.
Status: offline 		Brian May, I used .170 ID tubing to do mine, and I used about 22' of tubing. For the water pump I used 3/16 ID tubing, and used about 5' of it. Hope this helps.

_____________________________

2007 Green Rincon
ITP Type 7 wheels
26x12x12's all four Super Grip Super Lights
Moose handguards
HL Gel Grips
HL Temperature Gauge
HL 2" Lift Kit
HL Lift Springs
HL Front Brush Bumper
HL Rincon Skid Plate Package
HL Leak Shield
HL Heat Fighter Kit
K&N Air Filter and Outwear
Dynateck FI Controller
Wrapped Super Trapp Mudslinger Exhaust
XT30 Warn Winch
Spaced Oil Cooler
Re-routed Vent Lines
Detroit Gearless Locker

(in reply to dcfox)
Post #: 18
RE: Snorkeling my 680 rincon - 8/24/2008 7:34:24 PM   
grant2270


Posts: 325
Joined: 3/28/2008
From: Deer Park, Tx
Status: offline 		About a foot of 2" PVC, some connectors and a few feet of 1 1/2" spa hose. DC and marvin are good on the tubing, and run it to under your pod, or up your snork, depending on what you want.









Let me know if you want more pics.

_____________________________

2006 Honda Rincon 680
Dynojet Power Commander w/modified map
2>1 1/2>2" custom snorkle
UNI filter
2" exhaust power tip with drilled exhaust
28x12x12 Outlaw MST's
12x8 Vision Outbacks
3" XtremeATVer lift with fender bracket kit
HL high capacity springs
Aluminum Products front and rear boot guards
ATV Guru front and rear bumpers and 2" receiver
Quadboss cargo box and seat

(in reply to marvin1313)
Post #: 19
RE: Snorkeling my 680 rincon - 8/24/2008 7:39:53 PM   
grant2270


Posts: 325
Joined: 3/28/2008
From: Deer Park, Tx
Status: offline 		FYI Brian, there are several of the guys that posted on your thread that belong to another good site, rinconriders.com. Great site for guys who own the best bike on the planet. Seriously though, there is a great amount of knowledge and information on there. And you can do a search on there and find several threads on snorkeling your bike.

_____________________________

2006 Honda Rincon 680
Dynojet Power Commander w/modified map
2>1 1/2>2" custom snorkle
UNI filter
2" exhaust power tip with drilled exhaust
28x12x12 Outlaw MST's
12x8 Vision Outbacks
3" XtremeATVer lift with fender bracket kit
HL high capacity springs
Aluminum Products front and rear boot guards
ATV Guru front and rear bumpers and 2" receiver
Quadboss cargo box and seat

(in reply to grant2270)
Post #: 20
RE: Snorkeling my 680 rincon - 8/24/2008 8:34:32 PM   
hightechredneck


Posts: 1540
Joined: 9/6/2006
From: south florida
Status: offline 		thats where i got all my info . rinconriders.com

_____________________________

40/17/R16.5 GROUND HAWGS
-FOR SALE $80PM ME^^^^


07 Honda Rincon 680 Camo
-Custom Snorkel








06 Ford 350 Long Bed 4x4
-2inch Level Lift
-35inch Toyo M/T
-4inch Turbo Back Exhaust W/5Inch Tip
-Bully Dog Programmer

(in reply to grant2270)
Post #: 21
RE: Snorkeling my 680 rincon - 8/24/2008 11:14:21 PM   
meatman

 

Posts: 80
Joined: 8/18/2008
From: violet louisiana
Status: offline 		yep yep yep rinconriders.com, a great place to find great people unless you find DS, dcfox or even marvin. haha jj

i did a daul 1 1/2" snorkel with OUT cutting holes it anything. if i knew how to post pics here i could show you.

_____________________________

07 honda rincon 680, 3" lift, 27" mud bugs, full skid plates, daul "no cut" snorkels, and then some

(in reply to hightechredneck)
Post #: 22
RE: Snorkeling my 680 rincon - 8/25/2008 8:23:38 AM   
flyboymikedsu


Posts: 229
Joined: 11/6/2007
From: Brandon, MS
Status: offline 		Ohh, yeah...doing your own snorkel is easy, thats where I got my plans, rincon riders.  I ran mine out the side and up the fender with hard pipe and no holes.  Stealth is going to be next for me.  

_____________________________

2007 Honda Rincon
27" MudLites
2500 lb. Warn Winch
Custom 2" snorkel
3" Lift
2" exhaust tip
Waterproof Video Camera Housing for front rack
TV/Audio Box

2001 Grizzly 600

Pictures: http://s352.photobucket.com/albums/r342/flyboymikedsu/

(in reply to meatman)
Post #: 23
RE: Snorkeling my 680 rincon - 8/25/2008 9:13:36 AM   
Brian May


Posts: 15
Joined: 7/30/2008
From: Apple Springs, TEXAS
Status: offline 		Man yall guys give some great information.  I'm going to try to do my bike this weekend. I will post pics when I'm done. I'm going to go with 1 1/2" and if i put a hmf pipe later i will change it out to a 2".

_____________________________

2008 Rincon
27" Mudzillas
Stealth Snorkel

(in reply to meatman)
Post #: 24
RE: Snorkeling my 680 rincon - 8/25/2008 9:31:50 AM   
hightechredneck


Posts: 1540
Joined: 9/6/2006
From: south florida
Status: offline 		sounds like a plan. if you take about 7 to 8 inches of 2inch white hard pvc pipe and stick it in your stock airbox hole that should give you a good start then you can pretty much do what you want.

_____________________________

40/17/R16.5 GROUND HAWGS
-FOR SALE $80PM ME^^^^


07 Honda Rincon 680 Camo
-Custom Snorkel








06 Ford 350 Long Bed 4x4
-2inch Level Lift
-35inch Toyo M/T
-4inch Turbo Back Exhaust W/5Inch Tip
-Bully Dog Programmer

(in reply to Brian May)
Post #: 25
RE: Snorkeling my 680 rincon - 8/25/2008 6:19:26 PM   
BobTheBuilder680


Posts: 149
Joined: 8/24/2008
From: jacksomeville. FL
Status: offline 		on my 08' i only found 2 vent lines up under the front cover...is that the only ones i need to extend???  just snorkeled it with the same bule hose and 2" hard pipe coming outta my cover in front on handlebars...bike runs GREAT with it and no other mods..yet!!!

(in reply to Brian May)
Post #: 26
RE: Snorkeling my 680 rincon - 8/25/2008 7:11:54 PM   
meatman

 

Posts: 80
Joined: 8/18/2008
From: violet louisiana
Status: offline 		there is 2 on the rear diff, one on the front diff, and the water pump is the most important. on the right side(same side as the pull start) on the bottom of the water pump is a small gold looking tube. this is the water pump weep hole. from time to time it wil drop a lil coolant. if you do not vent this all the way up to the pod it will suck up a lil bit of mud, sand, etc. and this will eat up the water pump seal and the impeller costing about 500 bucks for a new pump and shop time. also it is very important to seal up your pull starter. the same thing will happen here exept it will be the motor not just the water pump.

_____________________________

07 honda rincon 680, 3" lift, 27" mud bugs, full skid plates, daul "no cut" snorkels, and then some

(in reply to BobTheBuilder680)
Post #: 27
RE: Snorkeling my 680 rincon - 8/25/2008 8:17:08 PM   
BobTheBuilder680


Posts: 149
Joined: 8/24/2008
From: jacksomeville. FL
Status: offline 		no pull start on my 08'....

(in reply to meatman)
Post #: 28
RE: Snorkeling my 680 rincon - 8/25/2008 8:24:03 PM   
hightechredneck


Posts: 1540
Joined: 9/6/2006
From: south florida
Status: offline 		not sure but take a look at the bakc of your motor thats where the pull start should be unless they didnt put them on 08s.

_____________________________

40/17/R16.5 GROUND HAWGS
-FOR SALE $80PM ME^^^^


07 Honda Rincon 680 Camo
-Custom Snorkel








06 Ford 350 Long Bed 4x4
-2inch Level Lift
-35inch Toyo M/T
-4inch Turbo Back Exhaust W/5Inch Tip
-Bully Dog Programmer

(in reply to BobTheBuilder680)
Post #: 29
RE: Snorkeling my 680 rincon - 8/25/2008 8:36:26 PM   
Disturbed Society


Posts: 331
Joined: 12/15/2007
From: Brandenburg, Ky.
Status: offline
quote:

ORIGINAL: BobTheBuilder680

no pull start on my 08'....


Pull the cover off on the right side.  The pull start is there, I promise!  Silicone the weep hole at the bottom, the handle where it rests in the cover, and where the rope goes through the handle.

_____________________________

2006 Honda Rincon (Camo), 25 inch Maxxis Bighorns For The Trails (Full of slime), 27 inch Outlaws on Black ITP SS 108's For The Mud,FMF Powerline Exhaust, UNI Filter, Dynatek FI Controller, Kimpex Front Bumper, ATV-GURU.com Rear Bumper, ATV-GURU.com 2in Rear Hitch Reciever, Powermadd Handguards, Death Grips, Warn XT 30 with Amsteel Blue Line, AP Skid Plate Package, Radiator Spacers, Vent Lines Re-routed, Stealth Snorkel


My Videos: http://www.youtube.com/user/lovec

(in reply to BobTheBuilder680)
Post #: 30
Page:   [1] 2   next >   >>
All Forums >> [OEM Discussions] >> Honda >> Snorkeling my 680 rincon Page: [1] 2   next >   >>
Jump to: