GWC
Posts: 22370
Joined: 5/7/2004
From: Kansas
Status: offline
|
Its Grabber Green engine paint by duplicolor. Thats why i put up the pix so if someone liked it they could do it as well.. Have not got them hooked up yet , but under the filter there are 2 plugs and iam pretty sure i can use one of those holes to get my pressusre from, if it dont work i will let you know. Yes i think they are nice looking gauges as well, plus they have 4 different back light colors for them. only way i could figure out how to do all 3 and keep a clean look plus kep them easy to see. that pix was taken from the seated position so you can see they are real easy to see.. going to run the wires out the pipe where it makes its bend and just seal the hole with sylicone real good. even if it would leak it would be a little leak and i wouold have to be real deep, but i think it will be fine.
< Message edited by GWC -- 8/20/2008 7:18:58 PM >
_____________________________
08 650H1 LE Warn 3.0 Snorkeled,Rad racked Custom gauges muffler tweaked Dynojet, slide mod, spring clipped Dyna Tech CDI Custom clutch kit 4.0 gears HL springs, HL spacers Gorilla axles 29.5 Laws, custom LE wheels 30" MLs, Black Castle Roks 05 500m Hidden Snorkel Dynojet,slide mod spring clipped muffler tweaked HL temp gauge 26" 589MTs, ITP type 6s H.ard P.ack A.rctic C.ats
|