Dannel86
Posts: 14
Joined: 9/10/2006
Status: offline
|
I have an 06 Kodiak 450 IRS. It has 25X10X12 and 25X8X12 BigHorn tires on it now. I am in the process of installing a Web cam and an 11:1 comp Wiseco piston to go along with my HMF exhaust and snorkle kit. I already have the EPI WE391050 sport utility clutch kit for stock tires with a DAYCO belt. My question is I am installing a set of 26X11X12 and 26X9X12 Zillas all around at the same time. Because of the increas of HP and Torque with the cam and piston and the lighter tires will I need to do anything to the clutch kit. I'm not sure what weight rollers came with the EPI kit but will the 26 inch tall tires make any noticable difference in the mud holes as far as turning them over. I am pretty knowledgable mechanically but not so sure about all the weights and things associated with the clutch. Any help would be appreciated.
_____________________________
'06 Kodiak 450
HMF exhaust,
HMF Jets
K&N Filter
2 Inch HL lift and HL Springs
Maxxis BigHorn tires
27" Maxxis Zillas
EPI clutch kit
Dayco Belt
Custome Snorkles
WEBcams .413 /.413 Cam
Performance valve springs
Wiseco 11:1 Piston
Vented
Water Temp Guage
Ricochet full body skid plates
Warn 2500 winch
PIAA extreme white light bulbs
Chrome grille
Last but not least Heated Grips
|
Inbox 
Printable Version
Kodiak450 clutch kit - 
New Messages
No New Messages
Hot Topic w/ New Messages
Hot Topic w/o New Messages
Locked w/ New Messages
Locked w/o New Messages
Post New Thread
