Issues after snorkel install, FI light on and PC not acting normal... Help.


	[All Forums] [Most Popular] [HL Related] [OEM] [Swap Shop] [Scott's Pics]	Chat Inbox

December 8th Second Chance Cyber Monday Sale!

Logged in as: Guest

Issues after snorkel install, FI light on and PC not acting normal... Help.

Printable Version

View related threads: (in this forum | in all forums)

Users viewing this topic: none

All Forums >> [OEM Discussions] >> Kawasaki >> Issues after snorkel install, FI light on and PC not acting normal... Help.

Page: [1]

Message

<< Older Topic Newer Topic >>

Issues after snorkel install, FI light on and PC not ac... - 11/24/2008 10:31:14 PM

TEXAN AVIATOR

Posts: 669
Joined: 10/19/2007
From: Richmond, Tx
Status: offline

Spent the whole day doing my MIMB snorks with a buddy of mine. We did both our bikes. As well as dielectric greased every connection I could find. Well on mine, after the install the Fuel Injection light is flashing and on the Power commander the light that normally goes higher at higher RPMs stays at the lowest setting. It never moves except when it boots up when the key is turned on. Anyone had this issue before or have any ideas? I'm going to try and contact Dynojet tomorrow but some info would help me sleep better.

< Message edited by TEXAN AVIATOR -- 11/25/2008 12:51:56 AM >

_____________________________

2008 Team Green Brute 750I
30" Mudzillas
14" SS212s Black
2" Highlifter lift
EPI Red Secondary
Full Muzzy exhaust
Power Commander
Gorilla Axle
MIMB Snorkels
ASR X-Series tie rods
Pen-lock
Audio Pipe
Moose Backrest
Ammo Boxes

Today America has chosen form over substance, emotion over logic, idealism over reality, but worst of all, color over quality. - Nov 4th 2008

Post #: 1

RE: Issues after snorkel install, FI light on and PC no... - 11/24/2008 11:40:50 PM

TEXAN AVIATOR

Posts: 669
Joined: 10/19/2007
From: Richmond, Tx
Status: offline

Anyone? Is there a reset for the FI light?

< Message edited by TEXAN AVIATOR -- 11/25/2008 12:52:15 AM >

(in reply to TEXAN AVIATOR)

Post #: 2

RE: Issues after snorkel install, FI light on and PC no... - 11/25/2008 9:01:24 AM

MSbruteABUSER

Posts: 91
Joined: 8/20/2008
From: Olive Branch, MS
Status: offline

Unhook your battery, turn your headlight switch on, and turn in circle rubbin ur stomach and pattin ur head while clicking your hills saying there's no place like home.. Then hook ur battery back up and that should reset everything

_____________________________

07 Kawi Brute Force 750
29.5 Laws
HL 2" Lift
HMF Penland Slipon
New MIMB Snorks
Twinair
Dynatek CDI
Red Secondary
ASR x-series tierods & ends

06 F250 PSD
4" MBRP Exhaust
SCT Xcal3 w/ Innovative tunes

00 Mustang GT
BBK CAI
BBK offroad h-pipe
Magnaflow Magnapack Catback
Steeda Short Throw Shifter
4.10 Gears
Steeda Underdrive Pulleys
((SOLD)) :'(
04 suzuki hayabusa
Akrapovic titanium 4to1 system
HID high and low beam
Trac Dynamics 6" over

(in reply to TEXAN AVIATOR)

Post #: 3

RE: Issues after snorkel install, FI light on and PC no... - 11/25/2008 9:02:52 AM

TEXAN AVIATOR

Posts: 669
Joined: 10/19/2007
From: Richmond, Tx
Status: offline

That would be funny if I didn't need this thing to run for a hunting trip.

(in reply to MSbruteABUSER)

Post #: 4

RE: Issues after snorkel install, FI light on and PC no... - 11/25/2008 9:10:25 AM

MSbruteABUSER

Posts: 91
Joined: 8/20/2008
From: Olive Branch, MS
Status: offline

Well usually on any fi engine, unhooking the battery drains the ficm and deletes any dtcs that would trigger a light.. U more than likely unplugged on of the fi connectors to grease it and that triggered the light..

_____________________________

07 Kawi Brute Force 750
29.5 Laws
HL 2" Lift
HMF Penland Slipon
New MIMB Snorks
Twinair
Dynatek CDI
Red Secondary
ASR x-series tierods & ends

06 F250 PSD
4" MBRP Exhaust
SCT Xcal3 w/ Innovative tunes

00 Mustang GT
BBK CAI
BBK offroad h-pipe
Magnaflow Magnapack Catback
Steeda Short Throw Shifter
4.10 Gears
Steeda Underdrive Pulleys
((SOLD)) :'(
04 suzuki hayabusa
Akrapovic titanium 4to1 system
HID high and low beam
Trac Dynamics 6" over

(in reply to TEXAN AVIATOR)

Post #: 5

RE: Issues after snorkel install, FI light on and PC no... - 11/25/2008 11:22:38 AM

phreebsd

Posts: 1402
Joined: 12/19/2006
From: Prattville, AL
Status: offline

does the bike run at all?

_____________________________

2008 Kawasaki Brute Force 750
Outlaws - 27x9.5 F, 27x12 R
1" Spacers
HL 2" Lift
Lime Green Secondary
M.I.M.B Snorkles
Viper Max 4000 with Amsteel Blue synthetic

2007 Kawasaki Prairie 360
Mudbugs - 26x10 F, 26x12 R
Twin Air filter
Viper 3000lb winch

Visit the NEW! MudInMyBlood Forum
TEAM ROLLIN' DEEP 2009

(in reply to MSbruteABUSER)

Post #: 6

RE: Issues after snorkel install, FI light on and PC no... - 11/25/2008 11:46:21 AM

engie

Posts: 5557
Joined: 7/9/2006
From: Jackson/Starkville, MS
Status: offline

The throttle position sensor and/or the pc3 connection is not hooked up correctly. The light on the pc3 monitors tps and will do so even if the bike does not run when the key is on.

If this doesn't work, I can run you through putting the bike into diagnostic mode and thus reading the codes!

_____________________________

Team Throwed Offroad crew chief

Building a few motors with another innovation or two...

04 Eiger Auto - Going to Flynts' for vacation...

Parting out 06 Cat700...

A bunch of Eiger Parts and Can-Am clutches for Sale!

(in reply to phreebsd)

Post #: 7

RE: Issues after snorkel install, FI light on and PC no... - 11/25/2008 5:48:29 PM

TEXAN AVIATOR

Posts: 669
Joined: 10/19/2007
From: Richmond, Tx
Status: offline

Well it was the TPS sensor. It wasn't fully fastened back in. Figured it out as I was loading it up to take it to the dealer, thanks God

_____________________________

2008 Team Green Brute 750I
30" Mudzillas
14" SS212s Black
2" Highlifter lift
EPI Red Secondary
Full Muzzy exhaust
Power Commander
Gorilla Axle
MIMB Snorkels
ASR X-Series tie rods
Pen-lock
Audio Pipe
Moose Backrest
Ammo Boxes

Today America has chosen form over substance, emotion over logic, idealism over reality, but worst of all, color over quality. - Nov 4th 2008

(in reply to TEXAN AVIATOR)

Post #: 8

RE: Issues after snorkel install, FI light on and PC no... - 11/25/2008 6:32:47 PM

Joe T

Posts: 273
Joined: 9/4/2008
From: Houston
Status: offline

Who da man!!

_____________________________

2008 Brute Force 750
Tires: 31 inches of designed by God and built by Jesus type of Mudtire
Wheels: Type 7 and 1 inch billet spacers.
Winch: Warn RT 2.5
Exhaust: Full Big Gun
Tuning: PCIII
Clutching: Red Secondary
Suspension: Remote Mount Reservoir Shocks; 2.5 inchs lift.
Breathing: MIMB and Twin Air
Body: Custom Beaten Floorboards
Awaiting: Dyno Tuning, hidden stereo and HIDs.

2007 Dodge Ram 2500, little smoky 6 cylinder, muffler fell off

(in reply to TEXAN AVIATOR)

Post #: 9

RE: Issues after snorkel install, FI light on and PC no... - 11/26/2008 12:28:51 PM

engie

Posts: 5557
Joined: 7/9/2006
From: Jackson/Starkville, MS
Status: offline

good deal!

_____________________________

Team Throwed Offroad crew chief

Building a few motors with another innovation or two...

04 Eiger Auto - Going to Flynts' for vacation...

Parting out 06 Cat700...

A bunch of Eiger Parts and Can-Am clutches for Sale!

(in reply to Joe T)

Post #: 10