Hmmm...I wander what Engie is up to here...


	[All Forums] [Most Popular] [HL Related] [OEM] [Swap Shop] [Scott's Pics]	Chat Inbox

December 8th Second Chance Cyber Monday Sale!

Logged in as: Guest

Hmmm...I wander what Engie is up to here...

Printable Version

View related threads: (in this forum | in all forums)

Users viewing this topic: none

All Forums >> [Most Popular Discussions] >> Other ATV Topics >> Hmmm...I wander what Engie is up to here...

Page: [1]

Message

<< Older Topic Newer Topic >>

Hmmm...I wander what Engie is up to here... - 9/27/2008 11:09:45 AM

engie

Posts: 5554
Joined: 7/9/2006
From: Jackson/Starkville, MS
Status: online

Just picked this up to "play" with!

Wander how(and where) it might end up.....

The motor has to be torn down/rebuilt from sinking. Getting started on that today...

Gonna take the tranny apart and "play" a bit with gearing. I want to replace the high-range gear set with something about 15% higher than the stock low, and also replace the low-range with a set that is about 10% lower...

10% lower low than stock, with a high that is 15% higher than the stock low...Wander why anyone would want to do that?

That's the idea anyway...

Thumbnail Image

Attachment (1)

_____________________________

Team Throwed Offroad crew chief

Building a few motors with another innovation or two...

04 Eiger Auto - Going to Flynts' for vacation...

Parting out 06 Cat700...

A bunch of Eiger Parts and Can-Am clutches for Sale!

Post #: 1

RE: Hmmm...I wander what Engie is up to here... - 9/27/2008 11:12:35 AM

GWC

Posts: 22315
Joined: 5/7/2004
From: Kansas
Status: offline

I know what it is

_____________________________

08 650H1 LE
Warn 3.0
Snorkeled,Rad racked
Custom gauges
muffler tweaked
Dynojet, slide mod, spring clipped
Dyna Tech CDI
Custom clutch kit
4.0 gears
HL springs, HL spacers
Gorilla axles
29.5 Laws, custom LE wheels
30" MLs, Black Castle Roks
05 500m
Hidden Snorkel
Dynojet,slide mod spring clipped
muffler tweaked
HL temp gauge
26" 589MTs, ITP type 6s
H.ard P.ack A.rctic C.ats

(in reply to engie)

Post #: 2

RE: Hmmm...I wander what Engie is up to here... - 9/27/2008 11:31:15 AM

gmcz71

Posts: 9499
Joined: 5/31/2007
From: Central Mississippi
Status: offline

Rotax!

_____________________________

1998 Suzuki Quadrunner 500 4x4 -
Possibly for sale/trade? Send me a PM.

2000 GMC Sierra Z71
- 285/70-17 Kumho AT's on HELO HE835 rims
- Blackbear tune (75% TM removed)
- Cherrybomb Extreme muffler
- Vette servo's
- torsion crank
- Clear corners
- ABS fuse removed
- Clear third brakelight

My Pics...
http://s523.photobucket.com/albums/w358/tylerz71mud/

(in reply to GWC)

Post #: 3

RE: Hmmm...I wander what Engie is up to here... - 9/27/2008 8:22:20 PM

BrootGoot

Posts: 2358
Joined: 2/1/2007
From: spartanburg, sc
Status: offline

i give

??? drag bike??

_____________________________

2008 Team Green KFX 450r
2007 Honda Recon ES (codename "Big Red")

WEAR A HELMET

(in reply to gmcz71)

Post #: 4

RE: Hmmm...I wander what Engie is up to here... - 9/27/2008 10:54:43 PM

ATVgirl

Posts: 2330
Joined: 2/6/2007
From: Geneva, Florida
Status: offline

hehehe .....i was going to say something but i have no idea what you are talking about! LOL

I just know that you are one that i would ask if i wanted to learn!

_____________________________

PRESIDENT / FOUNDER
EAST COAST DIRTY GIRLS.

MY DYSFUNCTIONAL FAMILY
Adopted member of SOUTHERN SWAMP BOYZ!
TEAM TIPSY wannabe!
Team ABS admirer :-)
Bayou Snorkle Friend
"ATVS GONE WILD" official crash dummy
E.C. Dirty Boys supporter!

www.thedirtygirls.net
www.myspace.com/eastcoastdirtygirls
www.eastcoastdirtygirls.com

EAST COAST DIRTY GIRLS MUD BOG TEAM #13.

Grizzley 660 - Green and Silver (the transformer)

(in reply to BrootGoot)

Post #: 5

RE: Hmmm...I wander what Engie is up to here... - 9/27/2008 11:35:32 PM

Kawa650

Posts: 445
Joined: 9/5/2007
From: TEXAS
Status: offline

HUMMMM... So, what are you up to with that or are you not going to say? ("Top Secret"?)

_____________________________

07' Silver Brute Force 650i
2" HL lift
Supertrapp Mudslinger
Moose module
MIMB snorkels
Dynojet jet kit
K&N & outerwears prefilter
3500 viper max winch
HL pen-lock
Ride N' Rest backrest
1.5" spacers
EBC severe duty pads
Highlifter XL2 12x7
Outlaw 29.5x10 & 12
Swamp Fox 28x9 & 12

New MudInMyBlood Forum

(in reply to ATVgirl)

Post #: 6

RE: Hmmm...I wander what Engie is up to here... - 9/27/2008 11:42:52 PM

James Chapman

Posts: 1772
Joined: 2/28/2008
From: Spring TX **USA**
Status: offline

Rotax Kitty

_____________________________

Support our Military and their mission

00 Dakota 4wd
BFG A/T's
Cherry Bomb

She's fast . She's real fast.

Past bike 08 brute

(in reply to Kawa650)

Post #: 7

RE: Hmmm...I wander what Engie is up to here... - 9/28/2008 12:40:12 AM

Lawnboy1988

Posts: 250
Joined: 9/13/2007
From: Brandon, MS
Status: offline

It's that ole MSU engineering degree comin out in him, just gotta be tryin to break, err make something better! I'm in starkville right now tryin to do the same thing!!!

_____________________________

2000 Honda Foreman S. Reverse Lights, 3rd light switch, Warn 2000lb winch, 26" Swampwitches. Homemade Audiotube. Air Horns. Strobes. Viper MX2000 Rear Winch. Disc Conversion

(in reply to James Chapman)

Post #: 8

RE: Hmmm...I wander what Engie is up to here... - 9/28/2008 3:31:51 AM

engie

Posts: 5554
Joined: 7/9/2006
From: Jackson/Starkville, MS
Status: online

quote:

ORIGINAL: ATVgirl

hehehe .....i was going to say something but i have no idea what you are talking about! LOL

I just know that you are one that i would ask if i wanted to learn!

Lol...well, that is a Can-Am 800 motor/tranny. I'm going to regear it to be strictly for mudracing in both "h" and "l". Still don't know what quad it will actually go into...

preferrably a "salvage" Can-Am for around $2k....that way my knowledge at least goes to work for me...somewhat!

See everyone in Texas in two weeks...looking like that race/ride might be a hinge towards the future of the sport. I'm definately foreseeing it being the best "racing" in the history of this game, SO Far...

_____________________________

Team Throwed Offroad crew chief

Building a few motors with another innovation or two...

04 Eiger Auto - Going to Flynts' for vacation...

Parting out 06 Cat700...

A bunch of Eiger Parts and Can-Am clutches for Sale!

(in reply to ATVgirl)

Post #: 9

RE: Hmmm...I wander what Engie is up to here... - 9/28/2008 7:59:30 AM

ATVgirl

Posts: 2330
Joined: 2/6/2007
From: Geneva, Florida
Status: offline

tops secret kawa!! i have pretty important non related stuff in my head sometimes.

I wish i knew more about rebuilding and fixing my bike, I have learned certain things over the past couple years in regards to the carborator, clutch, diffs, and such. But as far as the whole engine component.........No idea. I do have a question, i know that on one of the forums there was an "interesting" discussion about being able to take a can am and making the motor perform at a 650 level from the 500 status.......(again i may not be wording it correctly) but what i understood was it had to do with the valves i think??? is there any way to adjust a yamaha 660 up that way? i know about the big bore kit is that the same thing?

I am not sure i am wording it correctly. i am just wondering cause i race my bike......i LOVE how my bike rides and was wondering!

DONT LAUGH IF I MESSED IT UP!

_____________________________

PRESIDENT / FOUNDER
EAST COAST DIRTY GIRLS.

MY DYSFUNCTIONAL FAMILY
Adopted member of SOUTHERN SWAMP BOYZ!
TEAM TIPSY wannabe!
Team ABS admirer :-)
Bayou Snorkle Friend
"ATVS GONE WILD" official crash dummy
E.C. Dirty Boys supporter!

www.thedirtygirls.net
www.myspace.com/eastcoastdirtygirls
www.eastcoastdirtygirls.com

EAST COAST DIRTY GIRLS MUD BOG TEAM #13.

Grizzley 660 - Green and Silver (the transformer)

(in reply to engie)

Post #: 10

RE: Hmmm...I wander what Engie is up to here... - 9/28/2008 10:01:27 AM

engie

Posts: 5554
Joined: 7/9/2006
From: Jackson/Starkville, MS
Status: online

quote:

ORIGINAL: ATVgirl

tops secret kawa!! i have pretty important non related stuff in my head sometimes.

I wish i knew more about rebuilding and fixing my bike, I have learned certain things over the past couple years in regards to the carborator, clutch, diffs, and such. But as far as the whole engine component.........No idea. I do have a question, i know that on one of the forums there was an "interesting" discussion about being able to take a can am and making the motor perform at a 650 level from the 500 status.......(again i may not be wording it correctly) but what i understood was it had to do with the valves i think??? is there any way to adjust a yamaha 660 up that way? i know about the big bore kit is that the same thing?

I am not sure i am wording it correctly. i am just wondering cause i race my bike......i LOVE how my bike rides and was wondering!

DONT LAUGH IF I MESSED IT UP!

What they are doing is essentially the same as a bigbore or stroker kit...They are just interchanging components directly from Can-Am and not from an aftermarket company. There is a Hauck 765 kit available for your motor

...

_____________________________

Team Throwed Offroad crew chief

Building a few motors with another innovation or two...

04 Eiger Auto - Going to Flynts' for vacation...

Parting out 06 Cat700...

A bunch of Eiger Parts and Can-Am clutches for Sale!

(in reply to ATVgirl)

Post #: 11

RE: Hmmm...I wander what Engie is up to here... - 9/28/2008 10:15:26 AM

ATVgirl

Posts: 2330
Joined: 2/6/2007
From: Geneva, Florida
Status: offline

wow! i think i love you know! LOL

I may have to look into that ! thanks, you may be my new best friend!

_____________________________

PRESIDENT / FOUNDER
EAST COAST DIRTY GIRLS.

MY DYSFUNCTIONAL FAMILY
Adopted member of SOUTHERN SWAMP BOYZ!
TEAM TIPSY wannabe!
Team ABS admirer :-)
Bayou Snorkle Friend
"ATVS GONE WILD" official crash dummy
E.C. Dirty Boys supporter!

www.thedirtygirls.net
www.myspace.com/eastcoastdirtygirls
www.eastcoastdirtygirls.com

EAST COAST DIRTY GIRLS MUD BOG TEAM #13.

Grizzley 660 - Green and Silver (the transformer)

(in reply to engie)

Post #: 12

RE: Hmmm...I wander what Engie is up to here... - 9/28/2008 10:20:02 AM

700Blaze

Posts: 5654
Joined: 2/5/2007
From: Washington MO. home of B&J CUSTOM FABRICATION
Status: offline

cant wait to see the finished product

_____________________________

"700 CAT"
FULLY CUSTOM BUILT BY

B&J CUSTOM FABRICATION

MY SPACE-----MY PHOTOS
THE BOYS OFFROAD CLUB

(in reply to ATVgirl)

Post #: 13

RE: Hmmm...I wander what Engie is up to here... - 9/29/2008 10:21:16 AM

engie

Posts: 5554
Joined: 7/9/2006
From: Jackson/Starkville, MS
Status: online

Lol Kris...

Well, I got the topend torn down this weekend, and as is par for the course, there is NO visible damage to the cylinders/pistons, and all the valves look fine. I bought this motor because it was "smoking" and replaced under insurance...

Still gonna tear down the bottomend and make sure everything is fine, but it's looking like it might just need a ring/light hone job to be perfect? I'm kinda scratching my head now.

Gonna replace the gaskets as well just to be sure...

Tough to "diagnose/repair" a motor when you have no means to crank it up!

(in reply to 700Blaze)

Post #: 14

Page: [1]

All Forums >> [Most Popular Discussions] >> Other ATV Topics >> Hmmm...I wander what Engie is up to here...

Page: [1]

Jump to:

New Messages	No New Messages
Hot Topic w/ New Messages	Hot Topic w/o New Messages
Locked w/ New Messages	Locked w/o New Messages

Post New Thread

Reply to Message

Post New Poll

Submit Vote

Delete My Own Post

Delete My Own Thread

Rate Posts