Help with choke cable


	[All Forums] [Most Popular] [HL Related] [OEM] [Swap Shop] [Scott's Pics]	Chat Inbox

December 8th Second Chance Cyber Monday Sale!

Logged in as: Guest

Help with choke cable

Printable Version

View related threads: (in this forum | in all forums)

Users viewing this topic: none

All Forums >> [Most Popular Discussions] >> Tech Questions >> Help with choke cable

Page: [1]

Message

<< Older Topic Newer Topic >>

Help with choke cable - 10/4/2008 10:01:15 AM

VinceJE

Posts: 19
Joined: 4/15/2007
Status: offline

I need to disconnect the choke cable from the carb on a 05 Magnum. Carb is a Mikuni BST24. What's the trick?

(see the pic below) There is a 12mm fitting on the carb where the choke cable connects, but there's not really enough room to get a wrench on it. I think I can modify a wrench to get the job done, but I want to make sure that this fitting needs to come off before I grind the jaws on a good wrench.

I have to get the carb disconnected this weekend so I can take it to a machine shop and get siezed the idle mix screw extracted.

THANKS!!!

Thumbnail Image

Attachment (1)

< Message edited by VinceJE -- 10/4/2008 10:02:16 AM >

_____________________________

2005 Polaris Magnum 330 AWD
Mossy Oak Camo
2" HL Lift
12" ITP Castlerock Alloy Wheels
26" Mudzillas

Post #: 1

RE: Help with choke cable - 10/4/2008 12:08:42 PM

mud_duck

Posts: 2966
Joined: 2/28/2005
From: Almost East Texas
Status: offline

Yes, that needs to come off. I just cut down a wrench to fit. It's still a pain but if you grind enough off a wrench, it can be done.

_____________________________

'04.5 Polaris

TEAM CRUSHLOK Powered By Miller Industrial

CLICKMy Pics

______________________________________________
I may be old, but I'm not boring

(in reply to VinceJE)

Post #: 2