02Sleeper
Posts: 2694
Joined: 11/20/2003
From: Montgomery, TX
Status: offline
|
I recently purchased JB3231's Rhino. The Rhino came with a Trinity Racing 734cc big bore kit and a 11 to 1 JE Piston, and Hotcam stage II cam, A MSD ignition for the Rhino and a Hunterworks Sheave. I am putting the motor back to stock and would like to sell these parts. The parts all have less than 30 hours of run time on them and should be perfect. Once I remove the jug, piston etc... (Tomorrow 12-02-08)I will have them checked at a machine shop before I sell them and ensure they are perfect. If they are not I will disclose that to the buyer and figure out what to do from there. I suspect everything will be perfect based on how meticulious he was with the Rhino. New the parts cost: $899 For the Trinity Big bore and piston $120 For the Hotcam $209 for the Sheave $355 For the MSD Total $1584 I will take $1000 OBO plus shipping for all of it. If you have a Grizzly and can only use the Big Bore and cam, PM me and we can figure out a price. I am in Montgomery, TX (just north of Houston)
< Message edited by 02Sleeper -- 12/1/2008 11:46:29 PM >
_____________________________
2008 Camo Rino 700, Snorkled, 28" Laws, SS 108's (current) 2008 RZR - 29.5 Laws, SS 212's Snorkle, Extreme lift, spacers, HL Lift springs, Warn 4.0 (Sold) 2006 Rhino 450 Extreme lift, EVO Big Gun, clutch kit, Snorkled Big ole Stereo, leds etc...(Sold) 2007 Grizzly 700 29.5 Laws on SS112's Snorkled, piped. 2005 Bombardier 400 XT Custom "Wild Thing" paint scheme (sold) 2003 Kodiak 450 HMF Snorkle 28" Laws 2003 Arctic cat 300 4x4 Snorkled, EDLS, p
|